To date, there is a lot of disputes about which shock absorbers are better. After all, how many car owners, so many different opinions. Therefore, when choosing shock absorbers, specify an answer to a single question that general have all these designs? The answer is quite obvious. The main task of all shock absorbers in the transport device is to create conditions by which riding cars will be comfortable and safe. Designers care about it, however, do not forget the drivers.

Car shock absorbers, what tasks shock absorbers perform

The car shock absorber is a device that turns the mechanical energy of motion (oscillations) to thermal. They are designed to clean the oscillations and absorption of shocks and jogs acting on the car's frame. Shock absorbers are used in conjunction with elastic components - springs or springs, pillows, torsion, and so on.

The main task of the shock absorbers is the holding of a car wheel in constant contact with the roadbed to avoid loss of control over the vehicle. That is, the wheel should mostly and gently get around the obstacle and also quickly and clearly go back to the road, providing the required clutch. The weight of the car, at the same time, hold mostly springs or springs.

Shock absorber, as one of the main elements of the car suspension, as it affects the safety of motion

The shock absorber is one of the most important elements of the suspension of the vehicle, as it affects the performance of the car's behavior when driving, from which traffic safety directly depends on.

That is why, when buying shock absorbers, focus not on their brand and cost, but on the results of various tests that are published periodically. Moreover, choosing shock absorbers for the car, do not be lazy and "Visit" forums of motorists for your vehicle model. Any characteristics of the shock absorbers from the manufacturer are subjective for us.

Kayab's shock absorber, Monroe, Bilstein - Brake Test car at a speed of 40 km / h, Infrared shock absorbers on the brake path with emergency braking

Faulty or low-quality shock absorbers when braking play with a car, a culley joke. Especially if the ABC system is installed on the vehicle. When the system is triggered, the shock absorbers are opposed to the splitting of the car.

After all, when moving, the ABC system will slow down, then, to prevent UNES, letters the wheels. At the same time, the car not only slows down, but also swinging, that is, permanent load is carried out on the suspension. And than the amplitude of such a routing more, the efficiency from the triggering of the brakes is less. As a result - in case of emergency braking there is an increase in the brake path.

So, the test results at a speed of forty kilometers per hour, the following:

1. Bilstein Shock Absorbers (Bilstein, B-4 Series): Brake Path - Eight meters.
2. Kayaba Exel-G shock absorbers (kayaba): brake path - nine meters.
3. Shock absorbers Monroe Original: brake path - eight and a half meters.

In principle, the difference is small, some half a meter, but this distance to a person on the road either before the bumper of the previous car plays an important role.

Shock absorber Kayaba, Monroe, Bilstein - Test passing steep turns

It is also possible to take a sharp maneuver on the road in the details of the obstacles. When turning the rotation, the centrifugal force creates a vehicle body roll. Accordingly, pressure changes in the tires, and as a result, the grip with the road cannon changes.

Rising, the wheels try to break away from the road. The result is the loss of the trajectory and ... the coup of the car or demolition from the road. Here are the importance of shock absorbers, which reduce the effect of centrifugal force on the car body, not allowing the wheels to break away from the roadbed.

According to tests, demolition of the rear axle of the car on ninety degrees occurs:

1. Bilstein shock absorbers - at a speed of 59 kilometers per hour.
2. Kayab shock absorbers - at a speed of 52 kilometers per hour.
3. Montro shock absorbers - at a speed of 48 kilometers per hour.

Kayab's shock absorber, Monroe, Bilstein - car stability on uneven roads

In fact, the resistance of the car on the uneven road canvase depends on the joint operation of the shock absorber and the springs. The spring softens the blows from the irregularities of the road, and the shock absorber extinguishes the oscillations.

Actually, there are no complaints to the amortizers of Monroe, Bilstein and Kayaba for this indicator. The car actually the same "holds" the road.

Shock absorber Kayaba, Monroe, Bilstein - comfort while driving

This indicator is subjective, so you can use it only when you yourself will experience comfort while driving with those or other shock absorbers.

Tips Prof: Which shock absorbers choose depending on the way of driving

If you want to ride sharply, quickly and managed - the best choice will be Bilstein shock absorbers, but you have to endure shaking and rigidity. Want to ride comfortably, for long distances - it is desirable to give preference to MONRO shock absorbers. If, when you choose, you tend to compromise solutions - choose kayab shock absorbers.