How to open a car without a key. Lost the key from the car what to do, the key from the car inside the car.

Not one car enthusiast is not insured against the loss of the ignition key. But the loss, it is still half of the trouble, and if the key is inserted into the ignition lock, the machine works, you jumped out and there is a locking door with a central lock. There is no wedding key, you are in a panic. In order not to get into such a position, you should know ways to open a car without a key.

Content

Open the car without a key, ways to open

All weighing, accept the solution that will allow you to apply a little damage to the car, your finance and nervous system.

We offer several options:

smash the glass. The method is very simple, fast, but expensive, as the glass is expensive and when you can bother. Do not try to break the glass with a fist, it's just dashing guys in the cinema make it quickly and cleverly. Without prejudice to his health, you can smash the glass with a key, hammer or in extreme cases using a stone wrapped with a cloth. Of course, the method is fast, and it can be used in case of a threat of life, such as a child who remained in the car;
open the car with a wooden wedge. Find a wooden plate, a thickness of 3-4 cm, 20-25 cm long, prepare from this material wedge, i.e. Street one way. Prepare a thin metal rod, one rod end bend in the form of a hook. Wooden wedge Try to shove into the top corner of the door and remove the edge, try not to damage the car, fist the wedge between the frame and the rack, so you can make a gap, shove a metal rod with a hook, turn the block;
open the door with a wire hook. Prepare a hard thin wire, the length of it should be from 60 to 80 cm, one side of the wire at an angle of 45 *, the length of the bend is at least 10 cm. Sat a slightly seal in the glass from the door handle, insert a wire hook between the sealant, nudit the wire, Try to hook the door craving on which the button is located if you hooked - pull the hook up and open the door. All Russian-made cars can be opened in this way;
open the door of the machine with the help of electric drills. If you are not far from the source of electricity, you can use the electric drill if it is at hand. If you drill the larva of the door lock, then open the door. But this possibility does not always happen if there is no electricity, and there is a metal disc like a key, take it into the larva and check. Powerful screwdriver with flat sting, it may well replace the blank, and steel manicure scissors can be approached. You understand that you will have to change the larvae of all locks, or wearing several different keys;
for imported cars, we offer to use a piece of wire, 2 meters long. On the wire it is necessary to make a small hook, this hook can be shovel between the rack and the upper corner of the door. Pushing the wire into the salon, bend it, i.e. Direct to the door handle. If you hook a handle with a hook, pull the wire and the door will open;

let's try to open the door with the cord or rope. Take a piece of rope up to 1 meter long, make a loop in the middle, but do not tighten it. Your task is to push the loop between the stand and the upper corner of the door. To facilitate work, move the angle. Lower the loop on the door button, pull both the end and tighten the loop on the button, then the rope pull up, thereby lift the up button and open the door. This method is suitable for machines, the button in which is located on the top of the door and protrudes over the surface;
the most radical way - call specialists. Professionals have special tools and quickly cope with the task. Of course, you will part with the amount of money, but the glass is more expensive, painting and repair of the door scratched doors also cost big money.

Opens the car door qualified specialist

A professional who arrived in place will discuss the problem with the customer, tells the negative and positive moments of his work and will voicate the cost.

It can offer the following:

if you have a very expensive car to damage it, special equipment is used. The work is very expensive, but quality is guaranteed;
opening the door with pneumatic tools, vacuum suckers and telescopic manipulator. Such work is performed by professionals not a particularly high class, these masters do not have modern equipment and cannot work in other ways;
opens the Castle Professional, penetrated through the door glass seal. Professional has special equipment, owns knowledge of the device of the kinematic door locking mechanism. Such a method does not always retain internal mechanisms in integrity and may entail additional repairs.

In this article we told you about various ways to open the machine without a key.

We wish these knowledge to be useful to you, but if this happens not to be nervous, remember all the information and attempt to open the car without a key.