The modern trailer trailers for passenger cars is fulfilled by a variety of manufacturers offering their products. Therefore, sometimes it is very difficult to make the right choice. As a rule, the trailer for passenger cars is chosen based on a number of specific characteristics. The conditions of operation of the car, the intensity of work and other, equally important parameters are taken into account. About this further in the article.

Most of the passenger trailers are universal and are calculated both for transporting different self-propelled equipment and for the transport of ordinary goods. Often, passenger trailers are two species.

On-board ordinary automotive

Such trailers are intended for the transport of a wide variety of cargoes: agricultural, construction, small self-propelled equipment (snowmobiles, quad bikes and so on), furniture and others.

Motor vehicle for water technology

On boat trailers (that is, trailers for water technology) can be transported different plaques, ranging from a small boat or a hydrocycle and ending with the yacht.

Motor Design

Structurally, all autographs for passenger cars consist of such parts:

• Rama is assembled or on bolted connections, or on the welds. Motor frames that are assembled on bolted joints are more practical, because when it is damaged, it can be easily replaced with it.
  
• Suspension. The most common variations of suspension on auto drives for passenger cars - spring and torsion (rubber-burning). The torsion suspension is cheaper and simple, and spring - more reliable.

  

• Body. Body have all the on-board trailers. It consists of onboard and bottom. Body trailers do not have.
  
• Breathe. There is a power plate and a coupling head on the breath. Dyshlo happens v-shaped or straight.

  

• Lighting engineering. Front on the trailers are mounting the overall lights of white, behind - block headlights (stop signal, dimensions, fog lights, turning signs) and room lighting.

Loading Motor

In the presence of a driver's license of the category "B", it is possible to control the passenger vehicle with an auto receipt of any size. The main thing is that this trailer, together with the transportable cargo, had a full mass of no more than 750 kg.

Body size of autographs

The body size of the automotive trailer must be chosen based on the valid needs. In practice, there are the following main standards for the sizes of autographs:

1. The first is a length that should not be more than 1.5 times. The most common length in popular auto-drive models is in the range of 2620 mm - 5105 mm.
   
2. The second is the width that should not be greater than the dimensions of the car, 20 centimeters. Autographs with a width of 1695 mm - 2247 mm have the greatest distribution.
3. The third is the height that can reach three meters.

Uniaxial autographs

One axis makes it possible to make maneuvers more comfortably. In addition, the mass of uniaxial designs is obviously less than the mass of a two-axis passenger trailer. Also, if necessary, you easily (of course, it is easily due to the level of your physical training) you can manually deploy a trailer with one axis, which will save you from the need to make time-consuming maneuvers. The passenger uniaxial trailer makes sense to apply in the case when the mass of the transported load is small and placed it (cargo) is quite evenly, and the load on the coupling device is no more than 30-70 kilograms.

Two-axis autographs

Two-axle trailers have greater lifting capacity and better stability than their uniaxial fellow. But there are certain nuances. The passenger dual-axis trailer weighs much more than the uniaxial, so the ability to manually drive it up or turn it out. On one axis there is a possibility to take a maximum of 750 kilograms, and the two-axis pulls up to one and a half tons.

Additional options for autographs

Each passenger trailer can be equipped with additional features, depending on the possibilities and wishes of the customer. Often, trailer manufacturers provide the following additional features:

1. Winch.
   
2. Awning with arcs.
3. The extension is drawn.
4. Additional sides.
5. Podcast wheel.
   
6. Bracket for spares.

In order to unload bulk goods, the Option of Tipping the body (dump truck) should be provided in the autograph. It is also convenient to use it enough when throwing on the automotive of quad bikes and other self-propelled technology.

Most of the car owners together with the trailer ordered a rolling wheel immediately, which greatly facilitates the process of discharging and clutching the trailer with a car. And winches, as a rule, equip boat automotive to more convenient loading of hydrocycles and boats.

Criteria for the choice of autographs, what to pay attention to

If you have an idea of \u200b\u200bwhat type of track you need, you can start the choice of the trailer itself for the passenger car. There are several main criteria that should be considered when choosing a car trailer. Consider them in more detail.

bore trailer

The side on the trapper can be painted or galvanized. Galvanized boards extend the life of the trailer and better protect it from corrosion. Painted boards require more attention, as some manufacturers are painted on top of the black metal. The life of such sides will not be too big and, after some time, they are likely to be replaced. It is worth noting that the quality color of the sides is carried out only on top of the galvanized metal, which is why only such an option should be preferred.

side racks

To give the design of greater reliability and stiffness, lateral racks are provided in the corners of the trailers. High-quality side racks are made of metal with a thickness of five millimeters and more. They connect board and body frame with bolted or riveting connections. Riveting compounds are more budget, but less reliable.

the mechanism of onboard locks

During the operation of the route, it is often necessary to close and open the side. For the convenience of this operation, good passenger car trappers are equipped with special on-board locks. The mechanism of the onboard lock must be simple and easy to operate. Most often, you need not just close or open the back board, but you need to remove it. Therefore, when choosing a trailer for a passenger vehicle, attention should be paid to the presence of such an opportunity.

the bottom of the car trading

When choosing a trailer should pay attention to the bottom, which should be made from moisture-resistant plywood. It is worth noting that some manufacturers use steel sheets, but in the process of motion of an empty trailer or not much loaded it can create unpleasant noise.

Another disadvantage of the steel bottom - even with insignificant damage, the metal is able to start rust, and the moisture-resistant laminated Phaneur with the need is quite easy to replace. It is also very desirable that the bottom is connected to the frame with the help of bolts.

wiring

The motor wiring of the route must be solid (there should be no compounds and adhesions) from the outlet to the rear lights and overall lights.

light signals

When you choose the route at a mandatory, pay attention to the mounted lighting. Good autographs, as a rule, are equipped with multifunctional rear lanterns. To protect them from random damage, many manufacturers are mounted in a half-closed metal beam, simultaneously performing the role of the bumper.

quality of parts and knots suspension

Also, you should pay attention to the quality and reliability of the nodes and parts of the automotive suspension. High-quality pendants are made of metal with a thickness of 7-8 millimeters and more, and the bolts correspond to the high class of strength.

shock absorbers, springs

It is very desirable that the hub bearings, springs and shock absorbers on the passenger car trappers are made by famous brands, and not a handicraft method, although it is extremely difficult to check it yourself before purchased.

manufacturer

As for the manufacturer, it is desirable to give preference only to well-known companies that have proven themselves well. Ask the seller whether the warranty is provided to this product.

Price policy of autographs

To date, about twenty different manufacturers of passenger cars are represented in the Russian market, which can be divided into three segments:

• Cheap passenger cars - cost less than thirty thousand rubles.
• Trailers of the average price segment - the cost of thirty to fifty thousand rubles.
• Dear car trappers for passenger transport - the cost of fifty thousand rubles.

Cheap autographs for passenger cars include models of Chinese and Ukrainian production, as well as trailers of several small regional producers.

In the process of selecting such models, you must pay attention to such moments:

1. Thickness of welded connections.
2. Applicable components.
3. Quality of paintwork coatings.
4. Metal thickness (especially the suspension nodes).

The most expensive passenger car trappers differ from their fellow bottom price categories using higher quality components and materials. For example, most expensive frame trailers are covered with galvanized. However, their retail price is capable of reaching sixty thousand rubles or more.

The optimal choice for most of the motorists will be the acquisition of a passenger car trading of the average price segment. According to its operational and technical characteristics, they will have little to give up to more expensive models.

For 35-40 thousand rubles, you can purchase a car trailer for a car that will be different as features as:

• Reliable suspension.
• Whole wiring.
• The bottom of moisture-resistant plywood.
• Protection of lighting.
• Fastening on board.
• Galvanized board.

Council Profi: The best manufacturers of domestic trailers, this ...

In the average price category, trailers of such manufacturers are best proven:

1. MOSS autographs (MSS LLC).
2. KMZ autographs (Kurganmashzavod OJSC).
3. RESPO autographs (Respede LLC).

Remember that the trailer, like a car, is the transport of increased danger. Therefore, it is necessary to choose high-quality trailers from reliable components and materials.

How to find on Aliexpress and order the necessary, inexpensive mobile phone at a reasonable price and free shipping

1. First you need to register on site.. To do this, click on the "Registration" link, which is located in the upper right corner of the site. Then fill in a special registration form (name, surname, email address, password) and click "Create your profile".
   
2. Next, go to your profile and fill the shipping address so that you do not have to return to this during the order of the goods. Delivery address can be filled with Latin characters only. There may be up to five addresses. Naturally, when ordering any product, the system will prompt you to choose the desired address.
   
3. Then we enter the name of the desired product in the search string. In our case, this is a mobile phone.
   
4. To cut off unnecessary results Aliexpressthere is a convenient toolbar, for example, you can select only goods with free shipping and sort the results by the seller rating. As a rule, the sellers with high rating the most optimal value for money is the most optimal ratio. It is also possible to search for goods on brands.
   
5. When the desired product is found, go to the product description page, where we choose the color, the number and click on the "Buy Now" icon.
   
6. At the last stage we pay the order in one of the proposed methods.