As you know, today, almost all motorists use a contactless ignition system. It is it that it is installed by manufacturers to all modern cars, but the owners of the Vazovskaya classic remains only two options for action - either with envy to observe its operation on other vehicles, or to establish a similar system on its own machine. This article was specifically written for those who have not yet had to know all the advantages of applying the contactless ignition system, however, for those who are going to do it in the near future.

Contactless ignition system, device and principle of operation

The contactless ignition system that we are going to install is fully created from semiconductors, if you say in other words, the semiconductor parts are electronic components that are capable of much more efficiently and better fulfill their duties.

It is very interesting that in contactless ignition systems, even with the low speed of the power apparatus, the spark plug voltage is not reduced, which significantly improves the conditions for starting the motor and is very relevant in the winter season of the year. If we talk about the name of the system, then there is referring to the circuit and opening of the electrical circuit without the need to use mechanical contact. There is enough electronic switch, which makes locking or unlocking the output transistor.

As for injection and carburetor engines, in them, the contactless ignition system is slightly different, however, they are not completely different systems.

The regular ignition system in the classics of the VAZ, in which its flaws

Undoubtedly, in fact, every owner of the VAZ faced the problems described below. To speak as a whole, the regular ignition system in classical VAZ models is quite reliable, however, in the contact system there are some features, they are the root cause of all troubles.

Most of the car owners and professionals in this area are considered to be the main disadvantage of VAZ regular ignition systems. Just the presence of this contact group, which is subjected to mechanical damage, such as camber and contact wear, oxidation, vibration, etc. due to mechanical loads. Bearing decreases. All of the above problems indicate the obtasis of the contact system and in moral, and in technical terms. At the moment there is an absolutely new, completely different, more reliable and flexible system, called the contactless ignition system.

It is strange why manufacturers of car VAZ do not understand and continue to equip their cars with rear-wheel drive regular ignition systems, although contactless systems were filled with fifteen years ago on the eights. By the way, there were several attempts to establish contactless electronic ignition on the classics, however, they were not crowned with success.

Non-contact ignition system, the advantages of the contactless ignition system in front of the regular

First, by installing the non-contact ignition system on your car, each driver will forget the above-described troubles. But, much more important is the fact that you receive many indispensable, valuable and necessary advantages that distinguish this system. For example, a spark of a higher power that is formed as the voltage in the entire circuit increases, instead of 18 kV you will receive 24KV and many others. In the vehicles on which the contactless ignition mounted is significantly reduced in the exhaust, and the combustion of the air-fuel composition passes at full power. With the engine, it also works better. Undoubtedly, the advantages of the contactless ignition system are very much, and the disadvantages, if any, are completely invisible against the background of the advantages.

If you are still not enough above the advantages of the contactless ignition system, I bring to your attention four main reasons why its installation is simply necessary on classic VAZ models:

1. You do not have to clean the contacts and adjust the gaps all the time, follow the work and periodically monitor it. This system will make the work of the car more reliable.

2. The spark will be optimally distributed by all motor cylinders, although it is missing a wrinkle of contacts with a cam. Moreover, the beating of the axis of the trambling and vibration will disappear, which is very characteristic of classical vase models.

3. A large discharge in the ignition candle, which will provide in the cylinders to effectively ignite the air-fuel substance. Thus, the combustion of the mixture will be absolute, which means that fuel consumption will be smaller. On average, the vehicle will save approximately five percent of fuel. Not to mention the fact that an indicator of the exhaust gases will be less than twenty percent.

4. At low air temperatures, the launch of the motor will be significantly improved, despite the fact that in the ignition candles, the voltage force will not fall even with small engine speeds.

Contactless ignition system where to buy and how to install

You can buy a contactless ignition system at any store specializing in similar devices. If you decide to establish a system for a vehicle of domestic production, it is better to purchase a contactless system that was produced in our country. It will cost such a kit about two thousand rubles, but in the duration of work, efficiency and reliability at all is not inferior to the analogues from abroad.

Undoubtedly, you can order a similar system via the Internet. Online stores specializing in this area are quite a lot, in addition, they can also be purchased with separate parts of the kit, such as a coil, wire, a rubber or switch. The contactless ignition system is able to work trouble-freely for a long time, while its installation does not require special skills and is carried out very simple.

If we talk about the shortcomings, then this device has a fairly high price, in comparison with an ordinary ignition system, however, during the work it pays off. Sometimes it happens that the switch may fail, because it is too sensitive to weak fixation, but it is rather possible to call the exception from the rule than the disadvantage.

Installing the contactless ignition system on VAZ vehicles, step by step

The rotor of the contactless ignition system is a specialized distributor sensor.

The switch is designed to interrupt the current in the chain of the coil, and the rubber (sensor-distributor) gives it signals.

As for the contactless ignition coil, its purpose is to convert a low voltage current to high, to provide breakdowns among spark plug electrodes.

The kit includes spark plugs and wires, the clearance on the candlelight should be 0.7-0.8 mm.

1. For the start of the installation of the contactless ignition system, it is necessary to set the correct ignition on the old rubber.

2. Next, you need to remove the cover with the wires-distributor sensor.

3. From the coil is required to turn off the high-voltage wire.

4. Then you need to set the direction of the runner located at the top of the distributor using the short starter inclusions. The slider needs to be expanded smoothly perpendicular to the motor, and, after that, it is forbidden to turn the crankshaft.

5. Next, you need to remove the old distributor.

6. From the new distributor, remove the lid.

7. Insert it instead of the old one.

8. Exposing the ignition, it is necessary to combine it with points scheduled on the old rubber.

9. Then, you need to wear a new lid and wires on the rubble.

10. The coil also needs to be changed to a new

11. After that, you need to connect the wires.

12. Next, you need to install the switch, it is recommended to mount it into the free space between the header and the beam of the washer. It is possible to fasten it with the help of conventional screws, after having done the necessary holes in the bodies.

13. It is also desirable to change and candles.

14. In the end it is necessary to check the operation of the wires, and of course, to start the engine.