If your car, while driving with a small speed, begins to twitch if the turns are very much reduced at idle - most likely the reason for this is the contamination of the throttle. This problem, without referring to professionals, you can eliminate themselves. Total man, it is necessary to clean the throttle.

Throttle, for what is needed and why it clogs

The throttle valve adjusts the volume of air when combustion of fuel in the car engine.

Pressing the gas pedal, the fuel supply increases and the electronic or cable drive of the throttle is triggered. The damper makes turn and implues the air into the collector.

If the gas is reset, the fuel supply is reduced, the air for combustion is needed less, the throttle is covered.

Over time, the throttle is contaminated, as large engine speed machines can create a so-called "oil mist". The smallest drops of oil gradually contaminate the damper.

In addition to the above contamination, and the air filter, even the coolest, is not 100% delayed by moisture and dust - therefore, contamination particles fall from the surrounding air to the throttle. Accordingly, the contaminated throttle is not capable of creating a favorable operation for the intake of the fuel-air mixture into the car engine.

What is the way out?

And the output is that the throttle must be cleaned.

Throttle, way to quickly clean the throttle

If there is no time to complete the throttle damper, for a while, the damper can be cleaned by the method of quick cleaning. Work is not complicated, but able to give a quick result.

The car owner must dismantle the corrugated hose, separating from the air filter, to the inlet path of the air mixture.

If you find, with visual inspection, severe contamination, which means the cause of unstable engine operation, is the contamination of this flap node.

To clean, use a special tool, such as Liqui Moly, Hi-Gear or Lubricant WD-40. Professionals can use a carburetor cleaner, or other means that can be purchased in the auto shop. In addition to the above mentioned cleaning products, it is necessary to have a clean cotton rag.

It is necessary to apply the cleaning agent in the form of a spray and after a few minutes everything is removed by cotton rags.

But such ambulance will have an action for a short period of time, since the dirt accumulates not only on the surface of the flap, but also in the internal channels of the throttle node.

Throttle, how to make full cleaning with your own hands

If you have chosen time and decided to make a complete cleaning of the throttle, you, first of all, you need to get to the inside of the throttle.

The air nozzles are initially removed, then the coolant tubes are removed.

In order not to get a thermal burner, work starts to do after cooling the engine.

Since the hydraulic circuit, the fluid flows when the tubes is removed - substitute the container for collecting the fluid.

The next stage is the removal of the gas cable, most of the machines, you need to click on the pedal, while the cable will weaken and you can disconnect it from the throttle.

Under the throttle body, the old gasket is located, it must be deleted if the gasket is not completely removed, remove it with a sharp knife.

Do not use, to remove the remains of laying, abrasive tool, otherwise you scratch the case and in the future there will be a loose adherence. Now remove the idling and throttle sensors, clean them using a special tool and set to your previous place.

The internal channels of the housing can be cleaned with compressed air with a compressor or a special agent of the canister (purchased in the auto shop).

In order not to destroy the polymer rubber seals, do not pour in the node of aggressive chemicals.

Apply a cleaning agent itself to the surface of the throttle and save it about 10-20 minutes.

After the specified time, with the help of cotton vehicles, remove all the remnants of cleaning products and dirt.

Intellite the purified node very carefully, so that no contaminants are left and solid enclosures, otherwise they can get into the engine and lead to damage.

After cleaning, replace the gaskets and seals and collect the node in the reverse order.

electronic throttle damper - cleaning

If your car is modern and high-tech, you will need accuracy, attention and knowledge.

It is necessary to remove all the wires, inspect the connectors, all contacts must be clean.

Since the throttle of such machines is electronic, the spray of cleaning should not get on the drive motor, on the connectors and open contacts. Assembly and disassembly should be very neat to prevent closures, with each other, wires.

If you are not sure about your abilities, better consult qualified specialists.

For any method of cleaning the throttle, you cannot use abrasive cleaning products in the form of sandpaper or metal brushes.

The most optimal option, for cleaning the throttle, is the clean cotton rag or microfiber.

Do not use no darous winds from synthetic material, as everything that remains inside the throttle housing will fall into the engine cylinders.

To protect against dust, cleaning the throttle cleaning, it is necessary to be carried out in a closed room.

Throttle, timely cleaning - engine protection

If the throttle is always clean, only pure fuel-air mixture will be included in the engine of your car.

If extraneous inclusions and water particles are inserted into the engine, the turnover will be unstable and the engine can stumble.

At least twice a year it is necessary to diagnose the throttle.

Timely cleaning of throttle valve, extends the life of the car engine.