Most of the car owners do not like to ride in winter not only because of a large number of slush and too slippery, but also as a result of problems with the launch of the motor. So that winter for the driver has not turned into solid stress, it is necessary to warm the motor in a timely manner. In addition, one cold launch of the engine according to the degree of wear of Koint is about a hundred kilometers of the car. Independently insulation the motor for the winter can be with screw materials or with the help of special auto tube. About this further in the article.

Auto engine, why warm it in winter

Undoubtedly, you can not insulate the motor. Some car owners install on cars preheating motor or autorun systems, which makes it possible to save time after long stands in the cold, as well as immediately get along the steering wheel in a warm interior. However, these devices are expensive enough. In addition, the preheater shocks the life of the battery, and the autorun "eats" a lot of fuel.

Due to frost, the engine oil becomes thick and viscous, resulting in a violation of the operation of moving nodes of the system. Naturally, thick oil is much longer "goes" to the most remote corners of the system, as a result of which the surface of the elements interacting between themselves is faster than remain without lubrication. That is, immediately after switching on, the engine is actually "dry" and the so-called "oil starvation" occurs.

Elements with great strength drove each other, and thick oil has not yet managed to get to them. Because of this, the nodes wear out the faster than the usual, and the motor needed overhaul. From overly thick oil, the piston group suffers most of all, which, as a rule, ceases to work first.

And even with fuel in the frosty time, many problems are associated. As a result of low temperatures, the fuel evaporates worse and is poorly sprayed. These facts negatively affect the quality of the air-fuel mixture, which entails unstable operation of the motor. In addition, due to frost, the capacity of the battery is reduced, since the low temperature is capable of slowing the chemical processes inside the rechargeable battery.

Solve these problems can be solved in various ways. It all starts with the insulation of the motor and the garage, and ends with the use of special additives and oils. The ideal option is the integrated use of all listed methods. Preparing the car to winter should be in advance, replacing the oil on the synthetic, the density of which does not change when the temperature is reduced. Motor protection is based on the insulation of the hood. With this, the heat under the hood cover will be maintained longer, which contributes to the acceleration of the engine warming process.

How to reduce fuel consumption in the cold time

According to statistics, fuel consumption in winter increases by 25 percent. This is mainly due to a long engine warming. The average power unit to warm up to the operating temperature is able to burn to the floor of the fuel liter, and taking into account today's prices - this is simply "money on the air."

Reduce fuel consumption in winter can be nearby ways:

1. The first method recommends manufacturers of most foreign cars - do not warm the motor in general. When traveling for short distances without traffic jams, it may be possible to save. However, then you will have to spend a lot of money on the overhaul of the pistons, since heavy loads on cold elements are able to destroy the mechanism. The manufacturer is important that the car passes the warranty period. What will be further - the problems of the car owner. Therefore, professionals are advised still to warm the engine partially frightened, and partly when driving.
   
2. The most common method among domestic motorists to reduce the engine time during a cold start - to drown out the radiator grille using cardboard or other dense material. It is difficult to say how efficiently it is. The feasibility of this method is discussed on the Internet and so far. You can try, of course, if you have an extra motor. However, the cardboard is not able to affect the heating time, since it is not able to delay the warm air, which goes up from the motor, and not to the side.
   
3. The third people's way to reduce fuel consumption in winter frosts - insulate the motor. For example, cover it with felt, blanket or even a jacket. But the main disadvantage of this method is unsuccessful. The same jacket or an old blanket can be blocked at any time when driving, because when working some parts of the motor are heated to 700 degrees Celsius.

Based on the foregoing, it is possible to draw conclusions that to reduce fuel consumption (reducing the engine warming time in winter time), the motor must be insulated. However, it is necessary to make it a warm-up space, and not closing the radiator.

As tests showed, the optimal solution when insulation of the motor - the use of special materials intended for this. Such automotive insulation can withstand temperatures up to 1200 degrees Celsius and are made from high-tech fire-resistant fiber.

Automotive insulation, autodewed under the hood, dignity and useful properties

Materials for insulation of the motor - t. N. The referee is selected under the size of the hood and quite simply install. With such a blanket, the motor will not boil, because the radiator grille remains open. The auto tube turn the hood of the machine into a peculiar thermos, as they do not produce heat from the motor, which slows its cooling and speeds up heating.

According to experts, in the winter season, savings on gasoline with a warmed motor up to 25 percent. Motor insulation will pay off in just two months. In addition, the auto tube provides additional sound insulation of the motor compartment.

Automotive engine insulation have such useful properties:

1. Easy are installed.
2. Do not require constant care.
3. The insulation is fireproof, non-toxic, resistant to working fluids used in the car.
4. It perfectly holds the heat of the motor, so the engine quickly warms up and cools much slower.

From the fake, the real auto tube is characterized by higher quality. Complete to it, as a rule, an attached passport, a corporate package and certificates. Heaters for the engine are manufactured with environmentally friendly materials, and when they are used in winter, there are no irritations on hand.

Apply the branded insulation is beneficial and simple, the main thing when choosing is to choose the right size.

Auto industry how to install it with your own hands

You can warm the engine with the help of the auto tube very easily:

1. The auto tube is sprinkled on the engine and closes the compartment completely, since under each model of the machine there is a heater of the desired size.
2. If the motor compartment turned out to be non-standard, the edge of the insulation is the ability to turn.
3. Warm the motor is needed in the fall, when it becomes cold. Remove the blanket late spring. All the rest of the time the auto industry is under the hood. No need to remove it for the night.
4. It is impossible to wash it. Only dry cleaning is allowed.
5. It is also easy to remove the insulation, as to be installed - it is folded and folded into the package.

Tips Profi, the best autoworks, whether you need to warm the engine in winter, will the auto-ferrous for the season

Branded auto industry will serve you not one season. If you ride a car every day, it will pay off several times in the first year, since the accelerated heating "engine" will save you fuel, time and money. In addition, the auto industry is inexpensive.