Under the hood of the vehicle, all the most important elements, including the power unit, are hidden. Therefore, each car owner regularly has to look into the rotor space - then pour oil, then water, then check the electrical connections. Yes, and repairing the vehicle has often quite often, because, to admit, on our roads, car details wear out extremely quickly. However, there is one small element in the car, thanks to which the hood lock opens - the hood opening cable, in the event of a cliff to which it will be very difficult to get to the processionate space. About this further in the article.

The hood does not open, why

The main causes of the hood of the hood:

• Most often, the hood is encouraged as a result of the cliff of the hood opening cable.
• Damage to the hood when trying to hack.
• The battery sat down, and the castle is electromechanical.

The cable has broken, the causes of the cliff

This can occur for two reasons - due to the wear of the cable or the lack of lubricant in the movable mechanism. It was thanks to this, it would seem, a minor detail of the hood of the car can close and open. Therefore, its breakdown brings essential car owner.

The hood cable has broken, in which location is, how to find out

Often, the rope is broken in that place in which the car owner pulls behind the lever. A little less often he rifles under the capoty. The last option is much more complicated, but in any case, you first need to know where the cable has broken. To do this, you need to spend your hand around the lever and make sure that the cable does not fit to it. As a rule, the cable is attached to the back of the lever. Carefully explore the zone around the handle to find out exactly what the rope broke into.

The cable broke off in front of the lever how to solve the problem

If the cable triggered before the lever, arm the pliers and hook the end of the cable. Then pull it towards the cabin, that is, on yourself. At the end of the cable, it is advisable to make a hook by applying the same tool, otherwise the pliers can slip from a single-core cable. If you all do it right, the hood will soon open.

The cable cut off under the hood of cars, what to do, how to get to the castle if the hood opens back

The hood can open either forward (along the car). If it opens back, then you have two possible solutions to this problem.

how to get to the castle through the radiator grille

To do this, with the front of the car, we remove the decorative grille. Carefully contact this detail, as it is notable. Right behind the bars is the hood lock. You can get to the castle and without removing the grille. Try to reach it with a long screwdriver through an affordable space. If you manage to push the lock to the lock, to which the cable is attached, the lock will open. Then move the tongue and open the hood.

how to get to the castle through Carter Protection

This method of opening the lock is the most difficult, as it requires much more time, as well as the presence of an overpass or a survey pit. In addition, you will have to dismantle the protection of the crankcase, which is attached, as a rule, with the help of bolts. Work with bolts is neat. Next, dismantle the protection with grooves. Then, with the help of a flashlight, we examine the space under protection. When the inner part of the hood lock is found, we carry out the same actions as in the previous subtitle.

If the hood opens forward

If the hood opens forward, it will have to be pretty tinted. In this case, there are two options for opening the castle.

how to get to the castle through the air intake

You will need a homemade hook. You can access the lock by means of the air intake of the hood. Remove it and hooked for a cable through the grille. Sometimes you have to cut one division, because the narrow slots do not allow you to perform work.

how to get to the castle stretching the sealing rubber

If you open the hood using the previous method, another method will help you. We raise the edge of the hood in the castle area. I pull out the sealing gum - you should get a slot. Then, with the help of a hook or a long screwdriver, we draw a cable and open the hood.

Council Profi: timely repair and lubrication will prevent breakdown

In order for the hood cable to serve as long as possible, it is necessary to carefully lubricate its outputs using lithol. When replacing the item, it is desirable to choose a stranded cable. It is much stronger single-core, so long time will not break down. In addition, such a product is very flexible, slowly wear out and is not stretched. It is also recommended to more accurately treat the lever on the hood - it should not pull it sharply.

How to find on Aliexpress and order the necessary spare parts, autoelectronics, car radio at a reasonable price and free shipping

• We register on the site - enter the email address, your name and surname, invent the password.
  
• In your profile, fill the shipping address (required by the symbols of the Latin alphabet).
  
• In the search string, located on top of the page, introduce keywords, for example, car radio. In addition, the site has the opportunity to use the search by categories.
  
• With the help of convenient filters, we select unnecessary results, for example, choose goods with free shipping.
  
• On the description page of the selected product, choose the size, the desired amount and color, and then click "Buy Now".
  
• We pay the order in one of the proposed methods.