Any car requires stable investment. You have to change something alone, then other details. The owners of the VAZ 2110 are often faced with the problems of the rear beam elements. If you have come to the number of such lucky, and want to replace silent blocks own, then this article is for you. Today we will tell you how to choose silent blocks, how to check their wear, as well as install new silent blocks with your own hands.

Silent blocks, device, appointment, installation location

Silent blocks are small items, without whatever it is difficult to imagine the full control of the car.

They represent metal two sleeves, between which there is a rubber insert. They serve to connect details. And due to the fact that the insertion between these bushings is elapsed by oscillations transmitted from one node to the next one. Silent blocks are an integral part of the mechanism. They are in the front, and in the rear suspensions of the car.

Polyurethane silent blocks of the rear beam VAZ 2110, in which the pros and cons

If you got to Silentblocks and saw that your car had rubber silent blocks, and you decided to replace them, then there would be an excellent solution to replace them with the same, but on polyurethane. Thus, you will only contribute to improving the work of the suspension, and its characteristics. Good last by what will serve you at 5 times more than the market competitors - rubber. There is a little drawback, but it is not constructive, but financial. The thing is that polyurethane silent blocks are an order of magnitude more than rubber and not every motorist they are on the pocket.

Polyurethane silent blocks for Zhiguli 2110 will improve the behavior of your car on the road, by reducing undesirable deformation in the suspension, as well as eliminate the "squeezing" effect, which is characteristic of rubber fellow markets. This refers to the fact that choosing exactly the option, the suspension will always work in the mode provided from the factory. Finding and installing these details, you will achieve the fact that the blows and vibrations will be absorbed better, noise will decrease, and you will not have to think about their wear in the near future.

What silent blocks are better for VAZ 2110

There is no clear answer to this question. Recently, manufacturers began to put polyurethane silent blocks immediately on the stream, replacing with rubber. However, if you have rubber and you decide to replace them, then for a start, appreciate your ride style. Also important factor is the weather in your area. So, polyurethane is perfectly experiencing heat, he is not terrible constant temperature differences and extreme heat. But, it is not so good in the cold season. At low temperatures, the polyurethane has a hardening property, and if we consider that it is an order of harp of rubber, then its wear resistance in severe frosts is much reduced, and at this time the probability of breaking is increasing ..

How to check the rear silent blocks on the VAZ 2110

Usually, silent blocks serve sufficiently up to 100 thousand kilometers of run, but the roads in our country leave to desire the best, so there is an inspection of every 50 thousand km. You will understand your feelings, whether the silent block was worn out.

Visual inspection is done like this:

• we visit the pit;
• we look at the pure silent block.

In the rubber part it should be missing and cracks. If you are not a pros in this matter, read the inspection, look like a new silent block. Also pay attention to the collapse / convergence. In mandatory, you need to check the backlash in the silent blocks, if the value is large - urgently change the extension item.

When you change silent blocks

Not every time, silent blocks become the perpetrators in the problems of the car. However, there are situations when they are the weak link, and the repair is worth producing immediately.

This can be attributed:

• screw rubber;
• heard knocks in the back of the car;
• the controllability of the car is complicated: the back of the rear, it became difficult to enter turns;
• rear tires are unevenly extended compared to the front;
• tires are descending without visible causes of their damage.

How to get high-quality new silent blocks on VAZ 2110, to pay attention to

For models of VAZ 2110, elements with Wine Code 2914054 are suitable. They have an outer diameter corresponds to the desired, and fully correspond to the VAZ model 2110. It is not worth putting the rear silent blocks from the VAZ 2109 to your "dozen" from this checking will not work. Pay attention to the quality of the product offered. The market today is filled with low-grade silent blocks, but their service life leaves much to be desired. High-quality parts are made of high-quality materials that are able to withstand large loads and temperature regimens, and accordingly it is not cheap.

Choosing a workplace

This procedure, as replacing the rear beam silent blocks, is most often performed by the owner of the car, if the owner is not a young lady. Repair of such a plan does not require special skills, as well as experience, and in addition to everything costs everything is very cheap. The replacement of silent blocks is carried out on the lift, the observation pit or the overpass, setting the car in an affordable way.

Repair in your garage will give you the following advantages:

• cash savings;
• confidence as completed work;
• self-buying silentball;
• the warranty that the silent block was installed new, and not shot from another machine to a hundred.

Tools, fixtures, consumables

To replace you need the following tools:

• rozhkovo-precipitant key to "19";
• 2 jack;
• hammer;
• extension;
• the device for pressing silent blocks.

Replacing the rear silent blocks step by step

1. We dismantle the rear wheel.
2. We assign the cable of the handbrake to the side
3. We take the rood-ignition key to "19" and dismantle the nut from the mounting bolt.
4. We are wrapped the mount bolt with a hammer, this is if there is no special puller, after which you knock out the gate.
5. Raise the body car jackt.
6. We take down the eye.
7. Insert the label between the beam and the body.
8. We knock out the silent blocks of the back of the beam with the help of hammer and inquiring.
9. Clean from pollution seat.
10. Lubricate generously planting with a soap solution, capturing and a new silent block.
    
11. We will prescribe silent block.
12. Pull the bar.
13. The second jack is raising the beam and mount the fastening bolt, we enjoy the nut.
14. Lower the car.
15. 16. With all weight we press the back of the car as far as possible.
16. Tighten the fastening bolts.

Video to replace the rear silent blocks VAZ 2110

Tips Prof.

If you decide to improve car handling, then polyurethane silent blocks are what you need. If you do not break the car, but calmly move from one point to the other, then choose the usual option - rubber.

Do not chase as cheap. Although the item seems to be petty, but its gap can lead to more serious consequences.

If you yourself can not replace this part, contact a professional, so you will save your nerves, and money, and time.