Almost all motorists want to see their car beautiful and clean. You can make a car polishing operation in a car service, but if there is no free money in your wallet, then take it out once on the tool and make work on making the gloss with your own hands.

Car polishing is simply a beautiful appearance, or enhancing the protection of the paint surface of the body

Changing the car body polishing - you not only improve the appearance of the car, but also remove small cracks and scratches.

After polishing, a special protective layer is saved on the surface of the car's body - this layer is able to keep the body shine and increase the life of the paint coating.

Automotive painting of imported factory execution production usually has a thickness of 100 microns.

Since polishing involves moving the special coating, each frozen can reduce polishing thickness by about 5 microns.

Thus, the motorist needs to pay attention to the composition of polishing, especially for the presence of abrasive inclusions - such inclusions are able to quickly spoil the car coating.

Therefore, if you want to keep the integrity of the car coating - use a babosy composition.

But, at the same time you must understand that no polyrolol will help you remove large scratches from the body of the car.

What mechanisms and materials are needed to polish the car body with their own hands

Polishing machine - the required tool for working with the car body with your own hands.

Polishing machines are available different options and different pricing policies.

It is advisable to purchase a professional machine of famous manufacturers, but do not overpay.

You can buy a decent polishing machine within 3.5 - 4 thousand rubles.

If you work with a big grinder, then in appearance polishing machine is its native sister.

In the center of the polishing machine there is a thread spindle, a special disk is screwed to it, the diameter of which is from 120 to 150 mm.

The surface of the disk has special burdens, which are subsequently mounted polishing circles for coarse and fine polishing.

The polishing machine is equipped with a regulator of revolutions, with which you can change the revolutions from 600 to 3000 revolutions per minute.

What polishing circles need to be used in work

Modern polishing circles are produced on velcro and are produced from the two most running materials, namely, foam and wool.

Wool can be both genuine and artificial.

If you use abrasive pastes in your work - use the polishing circle of foam rubber or wool.

At the same time, these polishing circles work both with rude abrasive pastes and lightly leather pasta.

Professional workers often enjoy polishing circles from sheep wool, as woolen polishing circles give high quality work, serve for a long time, but more expensive foam circles.

Porolone circles have proven themselves more softer than wool.

If you work with non-abrasive compositions - use the foam rubs of large relief.

Usually such foam circles are black.

Before working, pay attention to the purity of the polishing circle.

The polishing circle should be definitely clean, it should not be an old pasta.

Circles can be washed with warm soapy water, then thoroughly rinse with clean water, squeeze and dry and dry.

When working with body polishing, constantly change the contaminated circles to clean - therefore, pour polishing circles in advance.

What polishing pastes use during work

All polishing pastes are divided into abrasive and non-abrasive.

Abrasive polishes are used when working with the body for removing the primary paint coating of the body.

It is clear that the abrasive polyrolol is allowed to work with a very bad body, and if the car is in excellent condition - do not use abrasive polyters.

Working with abrasive polyrolles should be carried out very carefully, you do not need to rub a stain for a long time, otherwise you get a hole.

Abrasive pastes are rude and subtle (context).

Rough abrasive pastes because they are called rude, which is used for pre-polishing.

These pastes are used in working with the theme by cars, where there is an old sweatpad coating, scuffing or shallow scratches.

Thin (convective) abrasive pastes are able to add brilliance with old, but not particularly sweat coatings.

Such pastes are able to remove even small scratches, as such scratches can remain after the coarse preliminary polishing.

Non-abrasive polishing pastes are based on wax, such pastes using polishing napkins are rubbed into a thin film, thereby emphasize the body gloss.

Non-abrasive polishing pastes serve to protect the gloss - these pastes are also wax, they are able to increase the resistance of the polished surface of the body to atmospheric precipitation and sinks.

How to produce body polishing with your own hands

Previously, before each operation, the car must be laundering well.

There is a large assortment of protective polyters, today "Nano" polishing is known to create a protective film on the car body, and winter protective polyters can protect the body from snow and winter reagents.

Before starting the body polishing with your own hands, it is necessary to set the speed on the grinding machine from 1500 to 1,800 revolutions per minute, a disk with a polishing circle is installed on the machine, then the paste is applied to the disk or on the polished surface, the paste consumption you will determine during operation.

Work on polishing is smoothly, light, without pressing with circular motions to the entire plane of the circle.

Machine polishing should be held hard with both hands, pay special care to the ribs, other protrusions and edges of the polished part.

Remember that the careless movement of the machine, especially with a woolen circle, can lead to paint on various protrusions.

In order not to overheat enamel or varnish, use the average turnover of the polishing machine and do not delay in one place.

To eliminate small scratches, process the body with a medium-abrasive composition, and then process the body with a polyrolla without abrasive - thereby you will remove the "hair" scratches.

Accordingly, a new circle is used for each polishing agent. If there is a risk of scratching paint - produce polishing these places in manual using a napkin, a mitten, a piece of clean vet with a small amount of polishing.

All unavailable places for polishing machine manually - it requires a lot of time and strength, but you, thereby be able to avoid flaws and not erase the surface of the car to metal.