Bitumen or Hudron, which is part of the asphalt, is able to deliver the car owner a lot of trouble. Finding on the car body, he leaves a noticeable stain. Especially it rushes into the eyes on light color machines. Unlike conventional dirt, bituminous spots that fell on the car is absolutely not washed off with water. If you do not take action on time, then an unbroken yellowish stain will remain on the car.

What is bitumen and why he is so dangerous for paintwork

We will try to figure out what is a bitumen and why it is so dangerous for the car's paintwork.

In essence, bitumen is a resin. It happens both natural and artificial origin. Artificial bitumen is formed in the process of refining oil or coal. Directly in the asphalt, this resin is used to bundle gravel and sand. The composition of modern asphalt coatings, the accurate bitumen may be from 13 and reach 60 percent.

The danger of bitumen included in the asphalt coating is that a solvent is used for its dilution in most cases. Based on the same solvent, materials are also produced for the car paint coating.

If bitumen hit the car body, the solvent begins to paint the lacquer and paint of the machine in the color of the resin. Subsequently, it evaporates, but the pigment spots of yellowish color remains. Since the pygments of the resin deeply penetrate into the structure of the paint coating. Therefore, it is necessary to remove bitumen stains in the shortest time, immediately after it gets into the car.

Car driving rules on freshlyasafalted Roads

When driving freshlyabalted The road should follow several rules. This will significantly reduce the risk of bitumen spots on the car body.

First of all entering freshlyabalted The road must be directly reduced by car speed up to 35-50 km / h. This is especially true of roads with high traffic intensity. It should also be reduced maneuver to a minimum, since when turning the wheel smelted Bitumen begins to splash directly on the car body. It should be kept a significant distance from the in front of the car. This is especially true of trucks that have no rear mudguards, the emission of bitumeumes from under their wheels in this case increases at times.

Why bitumen hits the car

Small particles of bitumen fall on the car as picked up with a direct ride in a new way and just passed the repair of asphalt. It may also be an asphalt coating with a high content of bitumen, which reads melting into hot weather.

The emission of bitumen particles can occur both from under their own wheels and from under the wheels of the rowing cars.
In windy weather, you should be particularly attentive when driving next to the venue. At the same time, it is absolutely not necessary for work to be carried out according to the strip that you are moving. The wind can scatter the web from the molten bitumen rather far away, it can deliver a lot of trouble by the car owner.

How to protect the car from bitumen

It is almost impossible to avoid bituminous spots to avoid the appearance of bitumen stains, but you can reduce the likelihood of their appearance, and eliminate the consequences after hitting the batuma on the car's painting.

To reduce the likelihood of their appearance, the above-mentioned rules for driving a car freshlyabalted The road, the same these rules are relevant when moving along a hot asphalt, except that it should be added that in this case it is not necessary to move across the rolling rut over it the bitumen flows much stronger.
Polyting the body of the car by Teflon and Fusso tool has been proven well.

polishing body Teflon

In addition to the magnificent appearance and removal of all small scratches, the car polishing the Teflon is excellent protects it from the effects of chemical reagents, moisture and dirt, including bitumen.

It also prevents the burning of the car's paintwork when exposed to sunlight.

polyrol coating Fusso.

This is a new development of Japanese scientists. It hides everything perfectly micro Scratches, making the surface of the car smooth and mirror.

It has a high response rate, ensuring the safety of the body's brilliance for a long time (up to 6 months). Different from similar means is very strong water and dirt-repellent action.

Ways to remove bitumen from the surface of the machine

By the removal method, bituminous spots can be divided into two different categories.

The first category is fresh bitumen spots that did not have time to dry. The bitumen, which in liquid, does not have time to penetrate the paintwork, and, therefore, it will be much easier to get rid of it. They must be deleted until they are completely dried. Such stains can be removed by a special tool with low solvents. That as a result reduces the impact of the means on the car-painted car and toxicity of the means.
In the warm season, such drugs ideally should always be kept in the car, along with a clean rag, detergent and water for preliminary and subsequent washing. Delete bitumen should immediately after directly entering it on the car body. Removal of bitumen spots using a special means should be produced on a non-heated body.
By the way, the fresh bituminous spot can be removed not only by a special preparation, but also ordinary margarine. It must be applied to the warm body of the car. When applied, it is perfectly mixed with bitumen splashes.

The second category is completely dried spots. These bitumen spots are removed using special preparations. They are applied to the cooled surface. After applying, it is necessary to withstand some time and delete. If necessary, repeat this procedure.
It should be said that after removing the solar bitumen spots, the likelihood of yellow traces will remain. Will get rid of which, you can only in one way, the repainting part of the car.

Important! When using special means, security measures specified on the package should be followed. In particular, it concerns the removal of solar bitumen spots.

Special means for removing bitumen from the surface of the machines

With the choice of means to remove fresh bitumen stains, there should be no problems. It should be paid to means with a low solvent or alcohol, to keep the paint coating machine. It is more convenient to use aerosol funds.
You should pay your attention to such funds as:

• TurtleWax - during the tests cleaned the body from bitumen from the first time. The manufacturer of the United Kingdom. Price 190 rubles.

• DoctorWax - does not badly clean the car body from fresh bitumen spots. USA production. Price more than 200 rubles.

• Velv - perfectly removes bitumen spots. Production Russia. The price is a little more than 60 rubles. It is most effective removers bitumen spots from these three means.

With old bituminous spots, everything is much more complicated. Quite a small amount of funds shows its effectiveness in the fight against them. Good effectiveness is distinguished by such funds as:

• Henkel Teroson – Teer. Entferner - Manufacturer of Germany. Price more than 600 rubles.

• Dinitrol – Cleaner with. fresh. citrus scent. №7230 - manufacturer Switzerland. Price more than 700 rubles.

It is also possible to remove bitumen spots at your own peril and risk use solvent, gasoline, kerosene or other combustible products. But it should be remembered that when they are used, the likelihood of damaging the paint coating. We in no way We recommend using them.
If the car has old bituminous spots, it makes sense to contact a specialized car washing. Where to remove them with minimal harm to the car's paint coating.
Bituminous spots in no way should try to scrape or pacify abrasive means. It threatens damage to the varnish and paint of the car.

Outcome

Bituminous spots largely spoil the appearance of the car, and can also affect its market value when selling. In order not to exacerbate the problem, you should remove them immediately immediately after their appearance until the bitumen is completely frozen. To do this, in the warm season, a special means should be kept directly in the car.

In cases where the bitumen hit the car paint coatings still left a yellowish stain. But the resin pigment does not penetrate enough deeply, can help the usual polishing of the body of the car with the removal of the top layer of varnish.
When driving freshlyabalted road or in hot weather when asphalt it should be glowed Move the machine very carefully and follow the above driving rules.