The rear view camera makes it possible to avoid different trouble when driving back, prevent a possible collision, and also significantly simplify management when driving back. When the driver turns on the rear speed, the monitor lights up, which shows that there is behind the vehicle.

Rear view camera, why install it

Rear view cameras allow the driver to perform a lot of useful things, namely:

• Reduce the time spent on the parking lot.
• Visually control what happens behind the vehicle.
• Gently park in the parking lot.
• Easy to park at night due to infrared illumination.
• Feed the confidence and sense of control of the space behind the vehicle, to avoid harming his and someone else's car.

Rear view camera with video transmission by wires, dignity and disadvantages

Wired chambers are distinguished by the presence of a cord stretched from the back of the vehicle to the screen to which the picture is displayed. The advantages of such cameras are excellent image quality and reliability, as well as a bit lower cost in comparison with wireless. The disadvantages of wired cameras can be attributed to the complexity in connection and installation, as it is necessary to stretch the wire under the cabin trim.

Rear view camera with video transmission using the transmitter with Wi-Fi receiver, dignity and disadvantages

Wireless chambers with a monitor in the cabin are not connected by a wire, which greatly facilitates the process of their installation, but in this case there are certain distances restrictions on which a sufficiently high-quality signal can be transmitted. If the distance between the monitor and the camera is more than fifteen meters, there may be blurred pictures and interference.

Such devices are similar wired. But instead of the wire - the radio and radio transmitter. Wireless signal transmission occurs with Wi-Fi connection and FM modulation. Wi-Fi connection is used to transmit signals from the camera to the tablet PC or other mobile devices. As for FM modulation, it is used in auto navigators and other similar devices.

Rear view cameras selection criteria for car

The main characteristics of cameras required for convenient management:

1. The presence of parking markup.
2. Waterproof.
3. The presence of lens protection.
4. Video resolution.
5. The magnitude of the viewing angle (from 120 to 180 degrees).
6. Profitability at night.
7. Sensitivity level.
8. The presence of black and white and color shooting, the possibility of switching.

How to choose the place of installation of the rear view camera, which you need to take into account

When choosing a place of installation, such factors should be taken into account:

• Aesthetics location
• It is noticeable to the device (in order to protect against vandalism and theft).
• How much the place is polluted.
• Racars video shooting
• Convenience for wiping, cleaning.

Tools, fixtures, consumables

1. Rear View Camera.
2. Drill.
3. Screwdriver.
4. Additional cable (if necessary, if there is not enough cable included in the camera package).
5. Fuse (if necessary, if not included in the package).
6. Insulating tape.
7. Clips, fastening elements.

Preparation of space for installing rear view camera

First of all, it is necessary to find a convenient place where you will put the camera. Some prefer to mount the camera instead of illumination of the room, others - on the line of lighting devices, and the third - to the location of the trunk lock, especially if the camera model has a thread and reminds of the door penetrate. The main difficulty, as a rule, becomes installing wires so that they are invisible.

Work on the installation of the rear view camera in the room backlight (phased job)

On some models, cars, such as, for example, Kia Cee'd (wagon, hatchback), you can set the chamber to the place of the plaffron to highlight the number. The order of work is as follows:

1. We unscrew the fastener near the leather hanging handle and dismantle the cover of the rear door.
2. We turn out the screws in the handles.
3. Remove with pistons upholstery.
4. Separate the connectors that are on the rear door.
5. We dismantle the door lining where the camera will be mounted.
6. We dismantle the lights of the number backlight.
7. We put the camera to this place.
8. The backlight is connected to the chain of overall lights.
9. Install back outdoor overlay.
10. Connect to the lid of the trunk "minus".
11. We extend the power wires and attach them to the reverse lamp.
12. We extend the cable going to the monitor, placing it in the corrugation, which goes through the ceiling, together with other wires.

How to install a rear view camera on the plank of lighting devices (gradually)

Also, the camera can be strengthened under a flappon without removing it. But in this case, it will be noticeable outside. In order not to do in the bumper of unnecessary holes, it is better to strengthen it on a plank with lighting lamps. The order of work is as follows:

1. We liberate the trunk.
2. We dismantle the frame with license plates.
3. If necessary, we extend the camera's leg. This can be performed using the steel plate of about 3x5 centimeters.
4. Drill the hole for the lens.
5. We stretch the wiring into the trunk through the plug located in the zone of the sparkler or rear bumper.
6. Remove the left side of the luggage compartment's luggage and the decorative lining of the luggage compartment threshold, under which the radio tape recorders are located (the device is connected to the display of the picture on the screen).
7. Connect the wires to the connector of the radio in accordance with the instructions that are attached to the device.
8. To ensure the power supply of the camera, we take plus to the left rear head. Connection can be performed in the torpedo area.
9. We put wiring using fastening and clips elements.
10. We test the device for performance: it should be activated automatically when the reverse transmission is turned on. If the image appeared on the screen, then you did everything right.
11. Return all the elements in place.

How to install the rear view camera at the place of the trunk lock

Order of work:

1. Mount the electrotrap.
2. Remove the luggage castle.
3. We insert the camera, with the need to expand the hole with a drill and progressing.
4. Mount the wiring and connect it.
5. Check the camera operation. We configure the picture by screwing the camera back or putting forward to the desired distance.
6. Fix the camera with the nut.

With this location, the camera is not enough, less dirty and gives a good overview.

Property Council: how to find and order a rear view chamber at a table price and free shipping

• Go to the site Aliexpress.
  
• Sign up on the siteBy filling out a special form, or log in to your account using your login and password.
  
• Immediately fill in the shipping address not to return to this when ordering the goods.
  
• In the search bar, enter the name of the goods you are looking for.
  
• Choose products for which free shipping is provided.
  
• We, sort out the seller rating.
  
• When the desired product is selected, enter the required amount on the page of its description and click Buy Now.
  
• Pay for the order.