When driving away from asphalt roads, everything can happen. For example, you can suddenly move from the track to the lower fields either simply in spring or autumn, when the incessant rains turn the soil country roads into an almost impassable swamp, where you can get stuck and on an SUV, not to mention the usual passenger car.

Usually, in such a situation, it is not necessary to do without someone else's help, however, however, there are a number of ways, with the help of which you can independently leave the mud. We will tell about them in this article.

How to leave the mud on the front drive distribution weight

It is much easier to leave the dirt on the front drive, because it gives his owner greater maneuverability, which you can not say about the rear-wheel drive cars.

• It is necessary to unload the back of the car and download the front. If you are alone, put things on the luggage compartment to the front seat. In case you travel with the company, leave one passenger on the front seat, and drop all from the rear.
• Next, it should be smoothly touched from the place and a leisurely turning the steering wheel to the left and right to try to find a clutch with a road surface on the edge of the rut.

How to leave the mud on the rear drive distribution weight

• In this case, on the contrary, it is necessary to unload the front axle and download the rear. Either just transplant the passenger sitting in the front seat, to the rear.
• Steering wheel put straight.
• Slowly moving in the opposite direction. To avoid slipping wheels, you can tighten the parking brake.

How to leave the dirt laying under the driving wheels

If the car firmly popped up and the method above does not help, you can put the rubber rugs, boards, stones, branches of trees and slowly trying to leave the dirt again.

How to leave the dirt swaying the car on the mechanics

If the previous methods did not help leave, try to rack your car. This can be done alone, and with friends. In order for this method to work, it is necessary that the vehicle moves back and forward, periodically increasing the distance traveled. To do this, you should systematically include the first and rear transmissions. Try to slip less with wheels, otherwise you can get riding in the mud. As soon as you feel that the car swung to the maximum, try dramatically to leave in the desired direction. Clutch must work carefully to not burn it.

If you do not turn out to switch the transfer quickly, try to dig a car with a clutch. It usually triggers if the wheels fell into the recess. Turn on the rear or first gear and slowly tricious. When the wheels begin to scroll, it is necessary to release the gas and click on the clutch. The car at this point must be rolling in the opposite direction. When she stops rolling back and starts returning itself in the desired direction, again release the clutch, helping the car to climb. Most likely, it will have to repeat the steps described above several times before you manage to get into a solid surface.

How to leave the dirt swaying the car on the machine

Cars with automatic box, as a rule, are equipped with various additional electronics that does not allow the wheels to slip when turning. Therefore, when you try to leave the mud, the vehicle will quite differently behave. Moreover, it will not be possible on the machine with the same speed to switch the transmissions as on the mechanics. Therefore, you will not be able to dig a car quickly switching transmissions, as if not trying. If you try to do it, the automatic box you will simply refuse.

In this case, use the method of rolling the machine half (as in the previous case) - without the use of the reverse gear. Move until you stop, after which it is simply rolling in the opposite direction and again forward. Since there are no clutches in cars with an automatic transmission, instead of pressing it, it is necessary to switch the box lever to the "N" position, and when you touch the "D" position.

How to leave the mud using the winch how to make a winch from the girlfriend

You can leave the mud and with the winch. It is chosen by the weight of the car. You can cling it for a pillar, a tree or a different object. If you do not have the winches, you can make it easily with the help of healthy tools, for which you need to have two cables and scrap. For the lever you will need a metal rod either a wooden bar, but instead you can use a branch from the tree or a stalk from the shovel. It is desirable that the cable is in the form of pigtails, and not flat, since it is more resistant to loads.

Look into the ground scrap, one end of the cable tie to the post or a tree, and the second end pin it to Lomu so that it is free to scroll on the spot and did not attract a tree. In addition, make sure that the rope lantya is attached to the tip of the scrap, and did not resist.

Go to the second cable. Tie one end to the branch, and the second to the car. Carefully screw the branch to the device so that the cable is located to the ground as low as possible. So you will have a lever, allowing you to rescue your car from the mud. The device should be strong, and the cable should not be rotten.

How to go out of dirt happing a scotch board to the car bus

There is also another original and simple method to leave the mud. All that will require you for this is a piece of stick or boards and a mixture of adhesive tape.

Tightly tying stick to the car bus. Such an interesting modernization will allow a simple passenger car not only to leave the dirt, but to drive there, where even a powerful SUV can get stuck.

How to leave mud using jack

What if the car sat on the belly, and the wheels simply spin in the mud? In this case, it is advisable to use the jack. However, it will take a solid and smooth surface for its application. If you are swamp, use a wide board as a support. When it is lacking, make a platform from the branches or put the spare or rubber rug. Lift the driving wheels with the jack of the car and put something hard - stones, branches, and even straw. Your goal is to raise the bottom of the car over the surface of the earth.

How to go from dirt on tug, complexity and danger of towing

If the machine is stuck, and all your attempts to leave the dirt ended with the collapse, then you only have one thing - go for the tractor. But remember if your car rests on the belly, while trying to pull it out with a tractor or truck, you can seriously damage the engine tractor, chassis or components of the exhaust system.

Therefore, before challenges the car from the mud trap, it is necessary to lift it with a jack and put something solid under the wheels - boards, stones, branches. And if there is an opportunity, lay out them all over the road.

Cable tug attachment points provided by car

Towing cable must be attached only in certain places (such points are listed in the machine manual). The force required to pull the vehicle from the dirt should be much greater than the strength that is used for standard towing. Therefore, it is necessary to fix the cable to the very durable components of the body, such as a hitch, rear / front axle and so on.

Rules for screwing hook for towing

In modern cars there are special jacks for screwing the hook designed to tow the TC. Before screwing down the hook, thoroughly clean the nest from dirt, sand and other contaminants to make sure that you shrew the hook to the necessary depth. To facilitate screwing, lubricate the hook thread with an oil or any consistency lubricant.

Tips Prof.

It should not be used steel cables for pulling out the car from the mud. They are not sufficiently flexible and rigid, so they are not able to absorb the shocks. It is very important to connect ropes correctly and securely, and so on. If some of the elements are incorrect to attach, it can be released at the crucial moment, creating a threat to the health and life of a person.