If you want to avoid trouble, when moving back, in the form of road accidents, especially if the driver has problems with the cervical vertebral diseases - we advise you to install the rear view chamber. By installing the rear view camera, when the rear velocity is turned on, on the monitor, which is in front of you, is reflected all that is in the background. Of course, when moving back, you can navigate the rear view mirrors, but the visibility at the rear view cameras is much higher than that of the mirrors. Naturally, it will require finance costs, but by installing the camera with their own hands, you will save a certain amount.

Rear View Camera, what camera model will suit your car

The rear view cameras have a large price variation, branded or branded cameras are much more expensive than Chinese.

If you are a supporter of high-quality equipment, it is advisable to purchase a good rear view chamber that is capable of creating a good overview and image. At the car market there are models of the rear-view chambers, which are produced for a certain brand of the car, they already take into account all the features of this model.

Rear view cameras can transmit video signal over a wire or via a transmitter with Wi-Fi receiver.

Rear view cameras easier to connect, as they do not need wireless wires, but it must be borne in mind that not every camera will work with that radio installed on your machine.

Therefore, by purchasing a rear view chamber for the machine, first examine the instructions and consult with a specialist about the possibility of installing this camera model to your transport.

The rear view camera must be convenient in management, so we advise you to pay attention to the following characteristics:

The rear view-camera must have a switching mode with black and white to color shooting;

-Same rear view must have a sensitivity level that allows you to shoot in the dark;

- The exercise an angle of review of the rear view chamber must be at least with the limits of 120 * -180 *;

-Came must have a good resolution when shooting video;

- the camera must be set to the defense of the lens;

-Came must have protected from moisture penetration;

The camera must have parking markup.

Rear view camera where to install it

Place installation of the rear view camera is of great importance. It is desirable that the ball of Bala helpers the driver, and not a headache.

Therefore, consider the following factors:

- installation of the installation should not be polluted;

- The installation should be imperceptible to an extraneous eye - it will prevent theft and vandalism;

- The installation of the camera should not spoil the appearance of the machine;

-Vodener must have free access to clean the camera from pollution;

- Reinforcement of the rear view camera, should have a good angle video shooting.

For example, the camera can be installed under the rear number, the backlight plaffle place and some automakers provide a place for the camera there.

In practice, for trucks, the rear view chamber can be installed on the roof of the machine.

The roof seat is protected from dirt hit, but the driver is inconvenient there will serve the camera.

You can purchase special brackets to install the cameras, but try to install the cameras so that the picture looks without distortion on the monitor.

Rear view camera, what stages you need to go through the chambers with your own hands

-In the first place it is necessary to determine the place of installation of the rear view camera;

-Product installation of the self-chamber itself;

- connect the rear view chamber to the reverse lamp;

-Product connection to the monitor.

Of all the above operations, the main difficulty is the installation of wires, as they need to be made invisible.

Rear View Camera, how to set the camera to the backlight backlight

Some cars, such as KIA CEE ", provide the ability to install the rear view camera to the place of the ceiling, which highlights the number.

Work is carried out in this order:

- Reputable fastener near the door handle, dismantle the poster of the rear door;

-The knobs need to screw the screws;

- a piston to remove the upholstery;

- It is necessary to separate the connectors from the rear door;

-Plash the back door lining (the fifth door, as the camera will be installed here);

-Tee down the lights of the backlight number;

- on the place of the plafo, we put the camera;

- connect the backlight to the chain of the overall lights;

- Playing lining put in place;

-t lid the trunk must be connected "minus";

-For connecting power wires to the reverse lamp, the wires must be lengthened;

- It is necessary to lengthen the cable that goes to the monitor.

It must be placed in the corrugation, along with other wires that go through the ceiling.

Rear View Camera, how to install the rear view camera on the lighting device bar

The rear view camera can be installed under the flappon, which lights the number. But, make a mistake right away, this camera will be visible to the stranger. The chamber can be strengthened on a bar with lighting lamps.

We do the following job:

- For the convenience of work, we free the trunk;

-Fire frame with license plates;

- Simply install the camera if the camera is uncomfortable, you can lengthen the camera's leg, for this attach the steel plate with a size of 3x5 cm;

- make a hole for the lens;

- Hold the plug, which is in the back of the bumper or spare parts, launch the wiring to the trunk;

- It is necessary to remove the left part of the trunk casing, dismantle the decorative trunk threshold lining - here you will find the radio tape recorders, the device is attached to the device to display the image to the monitor;

-B connector connect the wires in accordance with the instructions that are applied to the device;

- To provide a power chamber, connect "+" to the rear left spotlight, you can connect in the "Torpeda" area;

- using clips and fastening elements, carefully put wiring;

- Check the correctness of the connection, on the monitor, when the reverse transmission is turned on, the picture should appear;

-If all right, install everything that disassembled.

Rear View Camera, how to install the rear view camera at the place of the trunk lock

If the luggage lock looks like a door eye and it has a thread, here you can install the rear view camera.

We do the following work;

-Smont electrocumbers;

- Demonstrate the luggage castle;

-If hole is not enough to install the camera, expand it with a drill;

- In this hole, the rear view camera, stroken around the hole;

-Clix wiring and connect it all as in previous versions;

- Turn the camera, configure its image and secure the camera with the nut.

It should be noted that this solution is very convenient, as the camera is noticeably noticeable, less polluted and gives a good video overview.

In conclusion, I would like to say that the rear view camera will warn you from trouble and the driver will feel comfortably comfortable, comfortable and safe.