With a serious breakdown of the motor, the question arises about its major repairs. In a variety of cases, repairing the motor is inappropriate, and, sometimes, it is technically impossible at all. The price of the new motor can be up to 80 percent of the current value of the entire car, but in our time there is an excellent alternative - buying a contract engine, that is, a motor used. About this further in the article.

Contract engines what it is

The contract engine is called a good motor, which has already been used abroad - in Japan, USA or Europe. He was removed from the car, which was operated abroad, and brought to Russia. Unfortunately, only in our country the cars are driving until, strictly speaking, will not start raving. Many drivers ride on cars, which and gasoline spend a lot, and the oil is "eating", and the atmosphere produces a large number of CO. In Western countries, a completely different picture - the operation of such cars is severely punished (from fine to confiscation of transport).

Americans, Japanese and Germans change cars every five years. Even after a light road accident, they do not bother, but they acquire a new car. In addition, the tax abroad on a new car is much less than a five-year one. Therefore, such cars are sent to other countries, including Russia. Some are sold at once (if you do not have defects), others are repaired and also go for sale, and the third, not subject to recovery, disassemble and sold on spare parts.

Motor overhaul or contract engine that choose, advantages and disadvantages of both options

Overhaul is a motor bulkhead and replacing many of its elements. The entire piston group is completely changing and the cylinders are cleaned to give them the correct cylindrical form. At each stage, the car owner has to solve many complex tasks - the search for competent motorists, high-quality and suitable spare parts. Opinions on the possible problems of the motor, while in each car service can differ significantly, as well as the price of repair itself. All this is a lot worth and takes a lot of time. In addition, the overhaul does not give 100% guarantees to improve engine specifications. As a rule, after major repairs, the service life of the power unit decreases, horsepower is lost, and reliability, besides, fuel consumption may increase.

Much cheaper and easier is the acquisition of the finished knot, which can only be installed on the car. Contract engines, as a rule, were served on modern a hundred using high-quality oils and fuels, have a high residual resource, which reaches several hundred thousand km., As well as all the necessary documents that allow you to easily install it on another machine.

Contract engine assembly with hinged equipment. What is included in the kit

As a rule, attachment of contract motors also includes attachments, but not always. When buying, pay attention to whether the engine is installed on the engine (graduation and intake), generator, starter, rubber and hydraulicel. The presence of all data data significantly simplifies the process of installing the contract motor. If there is no attachment, the buyer has weighty bases for bargaining.

Contract engine from abroad, which contractual obligations are applied to the purchase, technical documentation

This unit necessarily apply to certain contractual obligations to the buyer (timing and conditions of delivery, equipment, warranty card, and so on), as well as payment of all necessary customs duties and fees. This product was legally brought to Russia, with the fulfillment of all necessary requirements. As a rule, it is attached to it a complete set of documentation for registration in the traffic police and customs.

Advantages and shortcomings of the contract engine from the USA, Europe, Asia

The advantages of the contract engine:

1. In Asia, Europe and the United States, the fuel is much better, so you can be sure that the engine has an optimal resource and is not very worn.
2. The likelihood of the use of high-quality oils in it is great.
3. In those countries, drivers are more careful about transport.
4. Small probability that you buy a motor that was served by non-professional.
5. Documentation provides a detailed description of the aggregate and indicates all its technical specifications.

Disadvantages of such a motor:

1. It is likely that the contract unit will have a big mileage, which is explained by good roads and high-quality gasoline. Therefore, to buy a motor, which is more than 6-7 years old, will simply be inappropriate, especially for diesel engines.
2. Carefully treat the purchase of motors from the USA, as Americans do not always make the necessary repairs. Undoubtedly, you can buy such a power unit, but it is better to check everything carefully before purchased.

Contract engines, as chosen and buy engines of contract engines

Sellers of contract motors operate according to a specific plan, allowing to perform successful implementation. It guarantees and provides the quality of brought motors. Initially, employees of companies and shops go to the country where the acquisition is planned. As a rule, it is Japan, Korea, Germany and France. With the help of special equipment, professionals check its performance and characteristics. From a large number of engines choose the best.

Then the motor is again checked, but already in Russia. Professionals change compression, as in many regions of our country there are low temperatures. Now the unit is installed on the stand and is included in the future buyer. You can also ask to disassemble the motor. Upon completion of all inspections, the owner is issued documents with which he needs to contact the traffic police. As a rule, a contractual guarantee is provided to the contract motor.

Tips Profi, what to pay attention to when buying a contract engine

1. Do not save when buying a contract motor. It is better to contact a good company and overpay a little than to buy from an unknown seller. In case of problems, they can be eliminated by these companies.
2. Provide all the data about your vehicle to which the motor will be installed. These include - car brand, VIN-code, year of release, motor number.
3. Photographs of the company employees of the company should be done abroad. You must show them to make sure that the engine will suit you.
4. The warranty service must be all the predetermined. Also, the buyer provides information on the operating conditions of the motor. Some firms advise immediately buy motor oils and filters to increase the service life of the motor.
5. Together with the engine should issue a contract of sale and state declaration. If these documents are missing, then the engine has already been operated in Russia before.
6. The goods must be well packaged, without any damage or cuts.
7. Collaborate only with firms receiving money through the cashier, which is needed to receive a check. In fact, it is impossible to prove the right to the motor, so you should avoid payment through bank cards.

Toyota contract engines Japan, why you need to pay attention to engines, the marking of which ends on FSE

The Toyota contract motor uses great popularity in Russia. However, if the labeling of such a power unit ends on the FSE, then it may not come to the car in Russia. It is possible that this unit is not comparable to our fuel and climate. It is advisable to consult with a specialist in the acquisition of contract motors, because among the engines with FSE, there are suitable.

Rules for choosing a contract engine from Japan

Be careful when buying a contract motor from Japan, because there are certain nuances. Some models of the engines of this brand have thin walls of the cylinder block, as a result of which it is impossible to repair them. This is especially true of those aggregates that have been manufactured since 1996. Toyota diesel engines are less problems than with gasoline, so they can be easily purchased in Europe.

What is more profitable, go beyond the border yourself, for the engine, or buy on the site from the company that purchases contract engines

Purchase options Two - independent purchase of a contract motor either through employees of the company that is engaged in selling them. In the first case, you will spend a lot of time and money - you will have to go to the USA, Japan or Europe, for which it is necessary to get a passport (in its absence) and acquire a visa. Naturally, the cost of the motor is less than in Russia, and in the end you will get substantial savings.

However, it is necessary to closely monitor the documentation on the motor, its number is clearly affixed. Otherwise, trouble may occur when crossing the boundary or when registering. It is much easier to buy a contract power unit through the company. They have a connection with dealers abroad, which will facilitate the search for the desired model. You can only learn the story of the company, how much it works in the market, to ask the reviews of customers who used these services, and the most basic thing is to find out if the selected firm will give you a guarantee for a purchased motor and for what time.

By contacting such a company, you can count on the help of a qualified personnel in this field. You will be offered a number of options, tell the history of the car with which the power unit is removed, and will also provide recommendations for use. Depending on your wishes, you will select the most acceptable option. Of course, the costs will be greater than with independent acquisition. But you can be sure that the specialists of the company completely conducted the diagnostics of the motor nodes and replaced the defective parts. A good company will do everything possible so that your acquisition serves for a long time and has not brought you chagrin. The main thing is to read carefully a treaty that sign, and do not lose the act, where all the works that the company has been described. In this case, you can return the engine back within 2 weeks if problems arise with it or your work will not suit you.

Who entrust the installation of a contract engine

To avoid problems with the integration of the contract motor, it is recommended to entrust its installation and configuration to competent specialists or directly to those companies that provide you with a guarantee for this unit. In this case, you will have two weeks to check the performance and quality of the motor. If for this period you will be detected faults, they will be removed free of charge as part of the warranty or completely replace the engine. The minus is that the installation price on the service will significantly exceed the cost of self-installation.

Contract Engine, Purchase in Vladivostok

Unconditional leader in supplying and selling contract motors to Russia is the city of Vladivostok. Here are sold engines of famous Japanese companies - Acura, Honda, Nissan, Mazda, Toyota. Some stores also supply motors from Korean manufacturers. Employees of such firms have a specific supplier base that sell aggregates. Vladivostok companies cooperate with most of Russia cities, which made it possible to create a whole dealer network.

Employees of companies have the opportunity to easily reach any motor from leading Asian manufacturers. Suppliers work quite quickly as a result of the proximity of territorial boundaries. You can get a motor after seven days. It is also worth noting that the cost of contract motors is significantly lower here than in people engaged in deliveries from remote ends of Russia.

Contract engine, much different is the price from the price of overhaul

The cost of the contract motor is actually identical to the price of the power unit after overhaul. On exclusive motors, the price may be much more usual, since the supplier needs to look for a rare engine model. Make purchases from proven companies that take the goods directly abroad, since the dealers put their markup, which exceeds the cost of the motor after the overhaul.