By modifying and modifying the parts of the vehicle, you need to think well, whether it is worth doing at all. Around the feasibility of mounting a lightweight flywheel is given a variety of opinions as negative and positive. About this further in the article.

Flywheel, what a device, why do you need a car

The flywheel is the part of the car, accumulating kinetic energy. His task is to equilibrate the energy entering the car. If during acceleration the vehicle is experiencing "weakness", the flywheel "gives it the power" to gain momentum. If the energy is enough, the element reserves it.

So, what functions perform this product:

1. Engine starting.
2. Engine connection with transmission.
3. Transfer torque from motor to gearbox.
4. Stabilization of the rotation of the crankshaft of the power unit.

According to external qualities, the flywheel is a fairly large metal disk, along the edge of which is a toothed crown. When you turn the ignition key, the starter comes in engaging with the crown of the flywheel, thereby turning it, and he, in his turn, rotates the crankshaft, driven by the vehicle itself.

The flywheel is lightweight than it differs from the standard

The standard flywheel weight is within 5-13 kilograms. As for lightweight versions, their mass from 3.5 kilograms. Not rare lightweight flywheels are made of steel, but they have smaller sizes, or from aluminum with standard dimensions. The weight of the details for a particular car picks up the manufacturer so that it corresponds to his class. So, balanced allows the car to meet consumer requirements.

What gives a lightweight flywheel

As you know, any refinement has both positive and negative sides. Of course, a decrease in the mass of the elements really contributes to the best operation of the motor - the vehicle becomes somewhat "submissive" due to rapid acceleration and response. However, a heavy flywheel is distinguished by a number of advantages.

Standard flywheel, dignity and disadvantages

Advantages and disadvantages of standard flywheel:

1. High torque.
2. Support for constant speed, but at the same time a relatively slow acceleration.
3. The possibility of moving on low revs, but the dynamics of overclocking is lost.
4. Some assistance when starting ventricular motorists starting riding increased programs.

Some drivers listed above the moments will serve sufficiently significant arguments for renunciation from the lightweight flywheel. The smaller weight detail must be installed only when you need an increase in the performance of the power unit and the dynamic start.

Lightweight flywheel, dignity and disadvantages

He generalized all the above, you can distinguish such advantages of a lightweight flywheel:

1. Soft movement without jerks and twitching.
2. For rotation, the engine requires less energy, as a result of which the motorist feels a significant speed gain.
3. The lightweight product improves the characteristics of the power unit - turns are gained faster.

Perhaps these are all the advantages that can be called. But there are much more possible risks and minuses.

Disadvantages of lightweight flywheel:

1. Difficulties of movement on marsh localities or snow-covered roads.
2. Significant reduction in torque.
3. Sometimes inconvenience is possible in conditions of movement in the city trait.
4. The adoption of the number of revolutions during the transition to elevated speeds.
5. At high speed, fuel is spent faster than with a standard vehicle configuration.
6. The speed is quickly recruited, but also lost quickly.

Can I easily ease the flywheel

If you still decided to modify the flywheel of your car, and all of the above did not embarrass you, then you know that it will not be possible to modify the item on your own. There are two ways to facilitate the flywheel. The first implies the complete replacement of the element, the second is cutting out unnecessary sites. As in the first and in the second case, it is not without special tools and the hands of a professional. It is not recommended to do holes in the product partitions, since then its strength will be reduced to zero. After modifying the flywheel or its replacement is not recommended to expose the vehicle with strong loads during acceleration and ride, because the lightweight element can split at any time.

Council Pro: Change in the construction of cars, good or bad

Any changes in the design of the vehicle are able to end the deplorable. If we speak exclusively about the flywheel, then at best there will be no changes, and in the worst - the opposite effect is quite possible, in the conditions of which the speed of overclocking will decrease at times.

How to find and order an aliexpress and auto parts and auto parts at a table price and free shipping

1. Go to the site Aliexpress.
   
2. We are registered - specify your personal information and email address. Do not forget to confirm it within 24 hours, otherwise, after this time, your account will be automatically blocked, and you will have to register again.
   
3. We enter the name of the desired product in the search string.
   
4. Since the results, as a rule, are very much, they must be sorted - we choose only goods with free shipping and only the soda products, you can specify the specific value on which you expect or sort the results by the seller rating, price or other criteria provided on the site.
   
5. When the required product is found, click on the inscription "Buy Now" or postpone the goods to the basket for further payment.
   
6. Fill the shipping address. You can specify several addresses.
   
7. The system then will suggest you choose the payment method - choose the most convenient.