In the past ten years, a real boom is noticed on a variety of automotive accessories. Moldings, spoilers, overlays on the thresholds, hood deflectors and many more became inalienable attributes of the modern vehicle. However, this is not by chance. As a rule, the elements listed above perform several operating functions.

They are designed to protect the vehicle - preventing mechanical damage. In addition, they improve aerodynamics and give the exterior originality, highlight, special style. Today we learn how to protect the thresholds of the car, because they are most often they suffer from the inaccurative relationship of passengers and the driver himself.

Threshold lining, views

If the vehicle is not very carefully operated, intended for daily trips, besides, not always on normal roads, over time the car owner detects the appearance of defects on the vehicle thresholds. If this fact is not given values, then after a few months, defects will lead to rust formation, which is pretty unpleasant.

Undoubtedly, the repair of defective thresholds will fly into a penny, because the paint does not fit them. Therefore, these elements have to completely cut, which is quite problematic to do outside the car service. Experienced drivers know that one hundred such a procedure will be ruined. It is better to immediately put protection than then to break your head over the elimination of the problem.

That is why very useful accessories appeared on the market - overlays on the thresholds. Their main task is to protect the elements of the vehicle from cracks, scaffolding, chipping and extension of the life of the car. Today, in the automotive market we see a very wide range of overlays on the thresholds, let's look at them in more detail.

chrome lining

According to the technical parameters, the chrome lining is in the first place, because it is difficult to find a material that is stronger and more reliable.

When installing steel moldings, you can be sure that it is durable. Yes, and looks like stainless steel richer, more spectacular, luxurious, more strware and does not follow budget, for example, as plastic. However, there are two nuances.

1. Steel lining give weight to the car. For example, for sports modifications is an unacceptable luxury. In fact, any vehicle will become harder that does not always like the owner.
2. The overlays of steel are significantly more expensive than analogs of fiberglass and plastics. However, here everyone is guided by its capabilities and goals.

decorative thresholds

Thanks to its technical characteristics, fiberglass is becoming more popular. Reliable, elastic, easy, she stated considerable opportunities, having received a lot of positive feedback from motorists. Today, fiberglass is applied everywhere.

Moldings from fiberglass durable, they have a small weight, and prices are quite acceptable - they cost a little more than plastic. Some car owners, to improve the aerodynamics of the vehicle and the desire to make it easier, is used in the design of fiberglass bodies. This solution has long been used by Japanese designers, which are in the first place they are saved and practicality.

plastic overlays on the thresholds

Pads on plastic thresholds are considered the most popular. Their advantages include an acceptable price, aesthetic appearance and, as a rule, optimal quality. Plastic linings protect against mechanical damage, capable of amortizing the blows of low weight, maintain a whole paint coating. If a strong blow will have to the threshold, and this will not be able to damage the vehicle.

Only the lining itself will suffer from such a strike, she simply cracks, after which it can be easily replaced with a new one, without the need for expensive repairs, which would be needed in the absence of molding. The lack of plastic products is their short-life. They are not able to endure tests of time or harsh climatic conditions. During severe frosts, plastic lining cracks even from a weak blow, which is undoubtedly bad. Although high-quality plastic moldings began to appear quite recently, but it is rather difficult to learn them among the masses of other options.

lining on the thresholds with illumination

The overlays on the thresholds with illumination are an excellent version of the tuning of internal thresholds, as well as the protection of the surface thresholds from defects when landing and landing passengers. This option has gained wide popularity in motorists and is increasingly found in the basic equipment of some automakers.

tools assistants

1. Lubes.
2. Pliers.
3. Soldering iron.
4. Narrow flat screwdriver.
5. Powerful cross screwdriver.
6. Wire bubble.
7. Solder, rosin.
8. Connectors.
9. Isol or shrink tubes.
10. White Spirit.
11. Water.
12. Clean rag.
13. Double-sided tape.

Installation of overlays on thresholds

Before installing overlays on the thresholds, you should read the instructions for them. Then they degrease the surface of the thresholds, for which acetone is suitable or alcohol.

The advantage of the molding installation is simplicity of technology - they are sold on a self-adhesive basis and are raised quickly and easily, without damaging the working coating. Do not forget to wipe the surface with a soft cloth after degreasing, cleaning, thereby all moisture and dust.

installing backlit thresholds

First, you need to consolidate the lining (read more about it above), then you need to pave a wire torpedo and connect the backlight.

When working with overlays, wiring solders, paving and connecting the wiring, you must check the performance of the backlight at each stage so that later in search of faults did not have to disassemble everything back.