To date, self-polishing the car body is increasingly in fashion. This is due to the too high price, which is required for a vehicle polishing in specialized car services. In addition, the polishing procedure with their own hands allows many drivers to get aesthetic pleasure from the process itself.

Polishing the body of the car with their own hands - the process is quite complicated, but, nevertheless necessary. As soon as the car is removed from the conveyor, the surrounding aggressive medium actively affects it, in particular, mechanical loads, dirt, temperature drops, precipitation, and so on, which inevitably leads to the wear of the body surface.

Body polishing, Positive polishing effects

With car polishing, you can solve a lot of trouble that are associated with scratches and cracks, as well as protect your car for a long time. For example, you are departed all the irregularities, return the car the original shine and make a coating for many years immunity to environmental impacts.

As mentioned above, the paintwork covering the vehicle is able to be covered by microcracks and other defects. As a result of these cracks, aggressive substances fall under a layer of paint and form a practically imperceptible process of corrosion. The focus of damage over time will become more and more, which will lead to the deplorable results if nothing is taken.

Basic vehicle body polishing functions:

1. After the polishing process, the car has a benign sighted view.

2. During the preparation of the car for sale, the polishing is considered a mandatory stage.

3. Actively protects the vehicle from environmental impacts.

4. With the help of polishing, small scratches can be removed from the body if their depth does not reach primer.

5. Also, polishing is needed to eliminate a variety of defects that have arisen after painting the body of the vehicle.

There are three stages for independent high-quality polishing machines:

1. It is necessary to remove part of the paint coating with a finely abrasive skurt.

2. Then, we produce a rehabilitation polishing of specialized abrasive paste.

3. Next, give the brilliance to the body with the help of protective polishing with non-abrasive paste.

Assistant tools and essential polishing materials

Of course, without the right materials and tools about competent and high-quality polishing, it cannot be speech:

1. We will need a quality polyrolol.

2. Polishing machine, better if professional.

3. Circles of soft and coarse processing for polishing.

4. White spirit.

5. Cotton rag or special napkins.

Choosing a workplace, criteria for the right workplace

First, it is necessary to produce polishing in a clean and closed room, which is well ventilated. During operation there will be a lot of dust that you need to immediately clean.

Secondly, it is necessary to take care of the highest possible lighting.

Thirdly, straight sun rays should not fall into the room, as the polishing components are dried too fast.

Preparatory work for body polishing

Immediately before car polishing, it is necessary to thoroughly wash it with the help of a car shut and allow the surface to dry. Then, finally eliminate moisture residues, rubbed the surface with special napkins or cotton cloth.

If you find some spots or other defects on the body, remove them using White Spirit. It is very important to carry out protective polishing on the surface, completely purified from sand grains and small dirt particles, as they can cause serious harm to the entire polishing process.

Polyrols for the car, how to choose the right polyroli

There are two main and most common types of literate body polishing - reducing and protective polishing.

Restorative polishing is carried out to eliminate small and shallow scratches, in particular, to remove various scuffs, stains or strips.

The procedure itself is a reduction polishing, in fact, is a mechanical removal of the surface layer at which the abrasive paste is used. The thickness of such a paste should be five microns, although this parameter depends on its grain. For example, the thickness of the factory paintwork is approximately 100-150 μm. This means that there are still ten or twenty polishes in stock.

Protective polishing is carried out with a different goal. It protects the coating from future negative effects of the external environment. At the same time, the abrasive paste is not used, on the contrary, to carry out a protective polishing of the car body, it is necessary to use abrasive polyters, are created on the basis of a variety of wax and synthetic materials.

It's no secret that the properties of various polyrolles directly depend on the main components. For example, it is very easy to apply protective types of polyterols in which the main components are silicone and wax. However, they are also easily removed - after the second or third visit to the car wash, the protective polyrolol will have to be applied again.

Among protective polyterols, the durable and most reliable are polymer polyters. They are characterized by similar properties and are applied every six months. Undoubtedly, they are much more worth the silicone or wax polymers. And their application is a longer and time-consuming process.

Also, it is worth saying that if the vehicle is painted into a pearl color or metallic, it is necessary to choose special types of polyterols intended specifically for such coatings. If we talk about the period of action of polishing, it all depends on the number of visits to car washes, weather conditions and many other factors. According to statistics, the polishing is qualitatively made without about six months.

In addition, there is such a polishing procedure that increases the shine of the coating of lanterns and headlights of the car.

Polishing scratches, features of work to remove scratches

To remove scratches from the body surface, you must use a special typewriter (eccentric grinding machine), which is intended for this. It should slowly treat it all the required surface. ESM should pass through all areas of the coating, not leaving any part. At first, it is necessary to process the coating with a circle of coarse processing with a medium-abrasive composition, and then change the circle on a less rigid, not having abrasive materials. If the machine is new, it is not recommended to handle it for a long time with a rigid circle.

A vehicle polishing should be carried out in stages, which will not give dry the composition of the polyerol before the next processing. In addition, it is better to spend each type of processing twice as not to miss a single part.

Protective polishing, step by step

When the machine performed its work, we apply a little protective polyter to the surface. Now it is necessary to gradually rub with a cloth, while it fails completely. We change the turnups on the machine, putting it on a low pace of work and continue to polish. High-quality polishing machine on average takes about two hours. To obtain a positive result, you should not hurry, it is necessary to put a soul in such work.

If you do not have the machines, you can polish with your hands. For example, the Japanese polish their cars only manually. Although, in this case, you need to have a lot of patience.

If you are polishing your machine manually, you will need to apply a polyrolol on a lint-free napkin and evenly distribute over the entire surface of the car. Next, it follows some time to wait, so that the mixture dried and polymerized, after which it was polished with a clean cloth with circular motions. It is necessary to continue the process until the coating receives a mirror glitter.