Over time, the upholstery of the ceiling in the car is dirty, flutters and burns out. In particular, this is relevant for ceilings that are made of bright materials. As a result of natural wear, they darken and resemble dirty gray rags. At the same time, in places where sunscreen visors are located, the initial appearance of the upholstery is preserved. That is why, with each lowering of these visors, any car owner begins to think about the ceiling of the car. However, not all motorists immediately decide on this step. First, they are trying to apply other means to restore the ceiling, for example, dry cleaning. However, as a rule, if the product aimed, these events are not able to help him. Some motorists buy a dry cleaning "dry cleaning", able to finally spoil the upholstery. After finishing the ceiling by this agent, the fabric can be separated from the foam rubber, which will further aggravate the position. Therefore, the ceiling is optimal output from this situation. About this further in the article.

Material for blending ceiling velor, pros and cons

Velur is a dense and high strength cloth, which is endowed with impressive hygroscopic properties. You can note a few advantages of this material:

1. It does not steer in the heat and warms in the cold.
2. Pretty wearless and pleasant to the touch.
3. Does not require constant care.
4. Acceptable cost.
   
5. To clean the velor ceiling is enough to have a brush, vacuum cleaner and any detergent. No need to spend money on special substances, as in a leather upholstery situation.

As for the flaws of velor, it is not suitable for creating a VIP-design, but is an excellent economy option.

Alcantara Ceiling Material, Pros and Cons

Alcantara (nonwoven ultramicroofibra) is new and little material studied material. To the touch, he is velvety and something resembles suede. Alcantara is quite capable of creating a sense and comfort in the cabin. Thanks to excellent performance and the original form, its prevalence grows daily. As a rule, Alcantara complements the skin, because in combination they give the salon a modern appearance, emphasize the great taste of the owner and its individuality.

The advantages of this material:

1. Excellent elasticity.
2. Resistance to temperature and combustion drops.
3. Resistance to ultraviolet (does not fade).
   
4. Perfectly cleaner.
5. Not wipe and does not glorify.
6. Durable and has a long service life.

The only drawback of Alcantara is its price, however, the funds spent on the ceiling is completely excused for a long time.

Material for drying ceiling Avtokarpet, pros and cons

Mostly car accident is used for tuning or saber tightness, as it improves acoustic properties. It is perfect for both the ceiling upholstery, because it stretches well and can take the form of any detail of the cabin. There are several types of carpet, among which there are waterproof materials. The palette of autocarete colors is rather diverse.

Material for blending ceiling leatherette, pros and cons

The skin substitute is often used to cover the ceiling auto.

Advantages of leatherette:

1. It looks respectable and beautiful.
2. Easy to care for.
3. It is inexpensive.
4. Suitable for creating a VIP design.

Disadvantages of leatherette:

1. Not practical.
2. It has a short life, since it is not too durable and is capable of forming cracks over time.
3. When pasting the ceiling can be frowning.
   
4. Does not let air, which reduces the level of comfort when driving in a car in hot time.

Tools and materials

1. Solvent.
2. Sandpaper.
   
3. Hard sponge.
4. Glue "88".
5. Scissors.
6. Gloves.
   
7. Hairdryer.
8. Leather roller.
9. Fabric itself.

Ceiling in the car, how to remove the ceiling in the car

First of all, it is necessary to remove the ceiling, which is most difficult. Some motorists think that for this it is necessary to remove the windshield, which, in fact, is not so. It is enough to dismantle the front passenger seat and through the rear door of the car remove the ceiling.

How and what to clean the surface of the ceiling to prepare

From the ceiling we remove the old upholstery and the remnants of the adhesive with the help of a solvent and a rigid sponge. To eliminate all irregularities, it is recommended to go through the surface of the sandpaper. In addition, it is worth noting that the new coating is much better stacked against the rough surface.

Tightening the ceiling, how to stick the material on the matrix, step by step

In essence, the ceiling hauling is the usual sticking of the material on the matrix. It is almost the same as wallpaper pasting. But the main task is to stick the fabric smoothly, without folds. Therefore, it is desirable to conduct this event together with an assistant.

In the center of the matrix, it is necessary to apply a thin strip of glue with a length of about ten centimeters. Next, you need to attach to the strip the bulk of the cutting of the tissue. In turn, we glit from the center of the matrix each side of the fabric. Glue need to lubricate every ten centimeters of the surface.

The main task of the assistant is from the glued center to pull the material on the sides. You, at the same time, should smooth out the fabric. These actions should be performed, putting cotton or cellophane gloves. If you prefer x / b mittens, you need them to be white. Otherwise, spots will remain on light cloth, so you need to act as accurately as possible.

Sticking on each side of ten centimeters, it is necessary to follow the bends of the matrix. Print fabric to the ceiling surface as much as possible. Next, wrap and enclose the edges of the material. Extra pieces of fabric need to trim neatly. Then do certain mounting holes, then install the ceiling back to the salon.

Tips Profi, what glue needs how to work with a car velor

In the process of tight ceiling, certain rules should be followed. Take care so that you have enough material. Prepare auxiliary tools in advance. The advantage of the automotive velor is that it does not require any special fixtures.

Some car owners do not particularly bother when the glue is selected and fix the cloth using the "moment". But it is prohibited, since this product under the influence of sunlight is able to distinguish toxic evaporation. The most optimal option in this case is the glue "88". You can also use aerosol glue. His advantages - fast drying and excellent distribution over the surface. But, before applying this tool, carefully examine the instructions.

If you previously did not deal with the car station and did not deal with a ceiling hawk, we advise to pre-work. First, try to cover with a small element. For example, drag the handles, the details of the thresholds and so on.