The cigarette lighter in the vehicle is quite an important and indispensable device that even non-smoking motorists use. They can, for example, charge the batch battery in a mobile phone. However, the main advantage of this device is its versatility, since a variety of electrical appliances can be connected to the cigarette lighter jack, in particular, a coffee maker or navigator. Unfortunately, he, as well as all the mechanisms, does not rarely fail. If the cigarette lighter does not work in your car, our article will be especially interesting for you and useful.

The cigarette lighter is a metal spiral in a plastic case, which is inserted into a special socket in the vehicle cabin. When you press the insert, the cigarette lighter is connected to the onboard electrical network of the machine and is held in this position using specialized bimetallic plates, which is why the heating effect of the heating helix during the electric current through it occurs. When the required temperature is achieved, the bimetallic plates are dissolved and the insertion lighter inserts in automatic mode comes to a disconnected source state, thereby feeding the signal of readiness to operate. The cigarette itself occurs by contacting the end of the cigarette to the rolled spiral.

By the way, usually in the cigarette lodge there is a special safety mechanism that protects it from fire and overheating when the insertion inserts in the cigarette lighter socket.

Car cigarette lighter - invaluable fixture

The cigarette lighter is one of the few parts of the car, which retained its original design from the time of its creation. In the former times, this device was intended only for cigarette the cigarettes, hence his name. However, in the modern world, it is capable of performing much more, distant from the original, functions. To date, there are a lot of manufacturers, install on cars for several such connectors, thereby, thereby increasing sales.

Interestingly, it was such a time when manufacturers wanted to remove the cigarette lighter from products, as it was practically not needed - even smoking drivers continued to use matches or lighter. The cigarette lighter received its popularity after the significant number of car accessories in the markets appears, for the operation of which a socket was needed. And it is this device that most suitable for this.

Today, the cigarette room is equipped with every car, and in some vehicles, there are even two. Also, you can always purchase and install a specialized splitter capable of making several outlets from one. In addition, a portable lamp can be connected to the cigarette lighter, vacuum cleaner, mini-sink and many other useful devices.

What power is the cigarette room

However, this valuable device has one significant disadvantage - it is designed for the optimal and specific power of the devices nuts from it, and even more precisely, then no more than 12 volts. Too powerful devices will give a large load on the cigarette lighter, with the result that the cigarette lighter in your car can fail. Therefore, you should not feed the vehicle such as a vacuum cleaner or a mini-washing from the electric socket of the vehicle.

Powerful electrical appliances can be connected to direct auto battery

But if you still need to connect any powerful electrical appliance, but I don't want to spoil the cigarette lighter, you can connect this electrical device directly to the vehicle battery. Undoubtedly, this option is not particularly convenient, but it is capable of ensuring the necessary result without a variety of breakdowns and trouble.

How to connect powerful electrical appliances directly to the battery

In order to recharge any electrical device directly from the battery, a number of specific and consistent actions should be followed. To begin with, you need to cut off the cigarette lighter plug on the electrical appliance. Then, fasten the device on battery terminals using crocodiles and wires. It is very important to establish wires correctly: the positive wire is on the positive terminal, and the minus one is for a minus one. To deal with wires, the cut plug should be unlocked. In this case, the wire located in the center will be a plus output, and conclusions with a minus - two side wires. Such a method is simple, safe and not take a lot of time.

Curl car does not work, we are looking for the cause of breakage

The causes of the cigarette lighter failure may be several. For example, the above-described device outflow due to powerful electrical appliances from it. However, if you did not do anything like this and adhered to the recommendations described above, the first thing that would occur to an experienced motorist, this is the combustion of the electric socket fuse.

In order to make sure that the fuse would have burned down, it is necessary to pay attention to the element with a cigarette symbol that smokes or having an inscription "SIGAR". It can be in absolutely diverse places in the car, for example, in a glove compartment, in the foot of the driver's legs, under the torpedo, in the trunk, under the hood and others. But, be that as it may, you can find this item at the location of the fuses or the relay block.

Replacing the fuse with your own hands

If the fuse really burned, you no longer have other options to replace it, after which the cigarette lighter will work again without any problems.

In the case of independent repair of the cigarette lighter, it is important not to install a more powerful fuse, since the next time the nest itself can burn instead. At the same time, the position can save only the absolute replacement of the cigarette lighter. In addition, specialists are advised not to insert a variety of poor quality plugs in the device connector, which are not tightly assembled, are not tightly sitting in the nest or just hang out, because it, again, can lead to a complete replacement of the device.

Replacing melting insertion inserter with your own hands

If the fuse is in good condition, you will have to act perfectly differently. In such a situation, you will need from the inside to get to the cigarette lighter socket, for which it is necessary to carefully disassemble the console under which it is located. Undoubtedly, such work is quite time-consuming and requires a lot of effort. Then, we check in what state is the fusible element, it will be 100% it will be broken or spoiled. In this case, it is necessary to replace it, but if there is no new part at hand, you can use the usual wire of the identical diameter.

To date, the car market represents many similar details, you can even get such a fusk insert that can restore yourself. As for the principle of its work, everything is quite simple - with overheating, the connections are disconnected with their subsequent reverse installation when cooled.

As you see, there are two reasons for the failure of the cigarette lighter, they are quite different and require a completely different approach.

If you decide not to repair yourself, and contact a specialized car repair service, professionals are quickly and efficiently diagnosed and eliminated the cause of the cigarette lighter breakdown. At least this method is the most expensive, but it is the most effective and safe. Also, you can fully replace the cigarette lighter on the maintenance service. Whatever it was, such a breakdown is not critical, although it can bring a lot of different inconveniences to the driver. Nevertheless, it is necessary to immediately repair various malfunctions in the car, as the wait for nothing will lead to anything.