The stove is a very important mechanism for a vehicle that allows you to comfortably feel in the car in the cold period. The output of it is immentable, cold air indicates the presence of strong contaminants. Before you proceed to cleaning, it is necessary to understand the principle of operation of the car heating system, and what means it can be washed. About this further in the article.

Car stove, device and work principle

The main elements of heating are bypass crane and stove, which are integrated into the car cooling system. The stove radiator is heated due to the high temperature of the cooling fluid of the power unit coming into the heat exchanger.

Car stove radiator than and why it is clogged

The stove radiator is clogged due to the fact that the entire dirt-cruising dirt as a result turns out in it, gradually blocking the cells. Over time, it entails a decrease in air temperature, which falls into the car salon.

Is it possible to clean the car stove radiator without disassembling the control panel

Many motorists are afraid to carry out the dismantling of the stove radiator, as this can entail the deformation of the fasteners. As a result, the integrity of the device is destroyed and it does not completely normally cope with its work. Therefore, you should know that the flushing of the heater of the car without dismantling is also possible. This event is absolutely not difficult and can be carried out without contacting the service center.

Tools, fixtures, consumables

1. Compressor.
2. Empty container.
3. Special cleaning agents.
4. Automotive or household vacuum cleaner.
5. Melt from scale.
6. Pump.
7. Connecting elements made of stainless or galvanized steel (clamps).
8. FUM tape (sealing material).

Examination and preparatory work

Cleaning the automotive stove begins with a survey of the boost space. It is necessary to detect hoses that come from the stove radiator. With the maximum accuracy, free them from all bonding elements. It is important to remember the order of the actions taken, which will help to place hoses in its original position. Disabled items are recommended to put in some box to lose anything.

How to choose liquid for cleaning scale, what to choose

Based on the financial capabilities and personal priorities, the role of cleaning agents can be boiling water or simple water, acetic or hydrochloric acid, liquid against the appearance of scale. Some car owners also use household cleaning products, for example, "Silit". But the most reliable are specialized solutions developed precisely for cleaning the radiator.

Safety when working with chemical solutions

Work with chemical. solutions are necessary very neat. Watch that the tool does not fall on the skin.

What time can be kept cleaning liquid in the radiator without prejudice to the radiator

Corrosive means can not be kept in the radiator for a long time. To carry out complete cleaning, it will be enough to 10-15 minutes. Not so aggressive substances can be left inside the radiator overnight.

Cleaning the stove radiator without panel panel panel with their own hands, phased work

1. Perhaps you will need artificially to increase the length of the hoses that you have freed. For elongation, you can take advantage of any hoses, for example, watering.
2. To avoid leaks and maintain tightness, secure butt places with clamps and sealing tape.
3. The lower hose is used to drain the liquid - leave it in the lower position. As for the top, it should be lifted above the level of the heater - it is best to place it directly above the panel.
4. With the help of a car or household vacuum cleaner, remove water residuals from the hoses. Also, for these purposes, you can use the compressor.
5. Then the cleaning fluid is poured into the stove.
6. Dirt softened after a while.
7. After the expiration of a certain time, carefully drain the fluid by using another hose. Acid is a fairly specific element, pronounced and causing strong foaming. If you have been chosen for washing exactly this liquid, take into account its features during plum.
8. As a rule, the procedure for cleaning multiple. When draining means it is necessary to achieve transparency.
9. The final stage is washing the radiator with clean water. To obtain the desired pressure, use the compressor or pump.
10. Washing the stoves on both sides is alternately. Cleansing liquid is first poured on one side, and then on the other. Also in cleaning can help the deep pump. Simply connect it to one of the hoses and lower it into the container with water and detergent. After a sufficient run, turn off the equipment and connect the pump to another hose. Repeat the procedure.

Washing of a car stove radiator washing with full withdrawal

Flushing of the automotive stove in such a way can be unsafe, but complete seizure significantly facilitates the procedure. In addition, this method makes it possible to clean as the inner part of the radiator and the outer. You can also perform external diagnostics, which will allow you to objectively assess the situation. When the radiator exits the cleaning will be an absolutely reckless procedure. In this case, only a complete replacement of equipment will help. When carrying out the washing itself, it will not be necessary to use the pump, for this there will be a rather normal head of hot water in the bathroom.

Tips Prof.

Self-cleaning of the stove is not the most difficult procedure, but its timely conduct makes it possible to avoid discomfort in winter and unnecessary problems.