Installation of foglights is not just a step towards improving the appearance of the vehicle, but also concern for its own comfort and safety. If you often have to drive in conditions of limited visibility, the installation of this design to the car is simply necessary. However, the required list of work is not limited to installation alone - for best efficiency, it is also necessary to correctly configure the system, which significantly increases its efficiency. In addition, only the correct adjustment of the "fog" can ensure that their light will not make drivers of opposing cars. About this further in the article.

Fog lights why they need

The light of modern fog lamps more effectively penetrates through the fog or rain veil, and also illuminates the road leaf. In addition, the light flux of "fog" is more flat, steels above the ground and spreads wide, rather than height. And this is done not in vain. As a result of the inconsistency of the temperatures of the Earth and air (the land is warmer), the fog reaches very rarely to the road. Consequently, with the help of fog headlights you will see the roadbed of at least ten meters the lowest headlights further.

In addition, as a result of the width of the beam of fog headlights, you will see markup and roadbrain. This will help you not to "fly" from the road that is not uncommon in the fog.

Familory color, glass color value, which is better for VAZ2110

Some car owners in the old manner believe that it is much better when the glass headlights have a yellow color that does not respond true. To date, most leading manufacturers produce white transparent "foglights", which are absolutely not inferior to yellow and even very often exceed them.

On the car VAZ 2110, you can install transparent or corrugated glass. For some reason, the first are more common, albeit less useful, as shine spots. The corrugated glass allows you to obtain a more directed beam, really increasing visibility in bad weather.

Preparatory work, which must be purchased for the installation of fog

In principle, you can buy a ready-made kit along with wires, but many motorists believe that when buying all the elements, the number of installation options is significantly increasing. In addition, all this will cost much cheaper. So, you need to purchase:

1. Set of headlights.
2. Relay.
3. A key with a yellow indicator.
4. Farmlights.
5. Plastic pads.
6. Wires. It is advisable to purchase them in the electrical equipment store. At the same time, it is better to buy 2 copper veins with 2 isolation (for example, ShVVP-2). The optimal cross section of 0.5 millimeters will be optimal, but if you wish, install lamps of greater power, take 0.75.
   
7. Narrow, as well as wide terminals, the so-called "Mom / Dad". It is better not to buy them together with the wires. Installation will be more convenient if the terminal data is crimped using the passage already on the connections of the mounted wires.
8. Terminem for mounting on "Mass".

Tips Profi, what pay attention to when buying

If on your car torpedo of the old sample, it is better to connect a set of fog headlights 2110. And for a torpedo of a new sample, so H. "EURO", it is more convenient to acquire "fog" 2115. Various, of course, it is possible, however, it is precisely in the convenience of the location of the buttons. As for the power of the lamps, 55 W is enough. It is also worth considering that too cheap fog lights will not serve for a long time.

Installation of fog (step by step installation instructions)

Connecting "Familum" must be started with the definition of their installation site.

Installing fog lights must be installed under the bumper if the installation elsewhere is not provided by the manufacturer.

Installing fog lights can be accurately appropriate to the scheme attached to them, however, it also has the ability to make certain changes, but do not forget that for optimal headlamp operation, both their adjustment is needed.

Most convenient to work according to the following scheme:

1. We pave the wires to the fog lights. It is carried out under the hood on the left around the wing, in about the same way as the installation of the main wiring.
2. Next, connect the power to the button on the dashboard. According to the factory scheme, the installation of the power is carried out from the fuse to the right on the dimensions. However, you can take it from the lighting button or with the output to turn on the main headlights from the ignition lock. In this case, the "fog" will burn only with the ignition turned on. Although it is not desirable, but still it is possible to take power from withdrawal to dimensions. However, then you can, for example, forget to disable fog lights and plant the battery.
   
3. Then connect with the plug headlights.

If you all connected correctly, the light on the fog lights should already be. However, if they do not light up when they are turned on, then a failure occurred somewhere and it is necessary to check for the "segments" of the chain. It will help a relay click - its presence suggests that its electromagnetic coil includes it. However, it is possible that it is necessary to replace the relay itself.

Adjustment of fog lights (step by step)

Immediately it is worth noting that according to the standards, the adjustment should be carried out with an additional weight on the driver's seat (75 kg). Initially, it is necessary to adjust the distance between the beams of light - it should be 577 millimeters from the vertical central axis. Every headlight is regulated separately, the second headlight, while closed with a piece of cardboard or other opaque material.

When the distance is exhibited, proceed to the adjustment of the height. It is very important that the center of the light flux is on the axis of placement of light components. The setting is made using a special screw, which is located on the side, for which in the frame there is a hole for a screwdriver.

At the end of the work you will get the light that matches the standards and will provide good visibility even in the most difficult conditions.