Installing the direct-flow silencer is one of the most simple ways to attract the attention of others to your car. The loud "growling" sound, which comes from the climb of the exhaust system, has always been common, both among the owners of tuning TCs and among the owners of simple cars. About this further in the article.

Tuning the muffler, which can be made from the technical part of the car do it yourself

Thanks to the installation of the direct-flow silencer, a loud bass sound is formed, which attracts attention to others and highlights your car from the stream of other machines. In fact, the installation of the direct-flow silencer is performed only for this.

However, not every car owner there is a necessary amount of money to install professionally made direct-flow, because of which many drivers create a straight-flow silencer on their own, which, in fact, is quite simple.

Direct-flow silencer, differences of a direct-flow silencer from the stock muffler

If we consider the main purpose of the forward-time, then it is worth noting that it is much faster with the exhaust gases from the motor, which, by the way, is also tuning. The usual exhaust system significantly limits the tuned motor, and the direct-flow muffler makes it possible to increase power. However, in our case, it should be calculated only on the emergence of a loud "sports" sound. Even if the power increase and happens, it will be insignificant and to feel it when driving is hardly possible.

River silencer, dignity

The advantages of the direct-flow muffler include:

1. Powerful "lever" sound.
2. Fast removal of exhaust gases from the engine.
3. A slight increase in power.

River silencer, disadvantages

First, you will not be able to honestly under the inspection. However, it has not been a problem for a long time, especially after the abolition in the traffic police of the mandatory passage. Insurance firms sell, even despite the car.

Secondly, it is likely that a strong sound will cause irritation in the people who surround you, especially in your yard, if moms are walking with children and so on.

The third important minus is that after making such changes to the exhaust system, there will be an increase in fuel consumption. And even though it will be insignificant, for some car owners it can still become an unpleasant surprise, especially considering today's fuel prices.

There is another factor, much more significant. After mounting the direct-flow silencer, it is possible that you will be disappointed due to the inconsistency of the final result with the expected.

Surely, many have heard the sound of cheap direct docks mounted on domestic cars. If you get the same after exhausting and long work, you will be quite unpleasant. And it is still mildly. Therefore, if you do without experience at this work, it is likely that you will have to redo all the few times.

In addition, after installing the forward-point, it is recommended to establish additional noise insulation, since the loud roar of the direct-flow silencer is able to stun not only others, and also you.

Tools, fixtures, consumables for work

1. New pipe.
   
2. Heat resistant insulation.
   
3. Stainless steel sheet.
   
4. Steel clamps.
   
5. Welding machine.

River silencer make from a standard silencer with your own hands, step by step

The whole process consists of three stages:

1. Remove the old muffler.
   
2. We prepare the basis for a new forward-point.
3. Place the filler to generate the necessary sound.

We will not focus on the first stage, since everything is more or less clear here. You just need to remove the old muffler with the car. Next, we study the design of the standard silencer, after which, making some changes, we calculate the design of the forward-point.

What to fill the direct-flow muffler

First, cut out the housing from the old muffler and open it. Then remove all the internal components with which the sound is muted. After that, it is necessary to connect through the welding your old pipe and the pre-acquired new one, which should have a large diameter. Next, all this is brewing into the housing, which remained from the old muffler.

Silent straight-flow silencer

Externally, in fact, nothing needs to be changed, otherwise it will be difficult to attach the muffler on the bottom, although sometimes more serious changes are made, but for the first time it is desirable not to complicate the task.

If you do not like what part of the pipe coming out from under the bottom of the review, change it with the help of special nozzles. They are sold in any auto shop.

River silencer with their own hand from perforated pipe, step by step

It is necessary to take into account that the temperature in the exhaust system is quite high, as a result of which a pipe, which is made of heat-resistant steel should be applied to the forward-point. Otherwise, she will very quickly procee.

Noise insulation of the muffler, or how to make a straight-flow muffler quiet

To form a powerful sound and isolate the elements of the machine from heating by the silencer, you need to wind the heat-resistant insulation welded design. The more denser the shell is, the stronger the sound will become. From above, the insulation must be closed with a sheet of stainless steel, which is tightened with steel clamps.

After that, fasten the whole design to the regular place. However, as a result of the fact that the body has become a little thicker, it may be necessary to refine the chuffler holders. Perhaps they will need to digest.

Tips Profi how to achieve the desired silencer sound

Naturally, you should not count that you will have the same sound, like professional direct-flow silencers, because there are completely different technologies and materials. However, the sound of your car will be noticeably improved.

In this matter, the main thing is to be able to cook well. If it does not work out to achieve the desired sound from the first time, do not be discouraged, it is not so difficult to remake everything. More information you will learn from the following video.