The package of each modern car includes such an important element as airbags that play one of the main roles while ensuring a secure ride by car. And so that the pillows did not fail the car owner when the accident occurs, either did not work accidentally during the movement, it is necessary when necessary to produce their repair. Few people will repair the worked pillow, although it is possible. Sometimes you just need to replace some elements in the device so that it is again like a new one. If there are problems with electronics, experts will help. Equipment will work on time after checking and troubleshooting. In addition, it is possible to replace the worked pillow. At the right time, she is able to preserve health and even save life. About this further in the article.

AIRBAG device

Most of the car owners know that airbags are installed in their car, but not all fully understand their purpose. However, this is one of the main passive security systems, which allows you to minimize the likelihood of injury when an accident occurs.

In the event of an accident, the pillows are instantly revealed and make it possible to prevent the driver's tight contact (passenger) with the parts of the vehicle interior, excluding dangerous overloads. However, this is true only in the event of an accident at average speed - in the accident at high speeds can only be calculated for good luck.

Among the car owners is quite common, the myth is sufficient that airbags can work, even if you kick over the bumper. However, with reality, it does not actually have anything in common. Most cars for airbags are programmed to trigger at a certain speed. For example, during a collision with a rigid obstacle, pillows are revealed at a speed of more than 30 kilometers per hour. And during the strike of a deformable obstacle (i.e., another vehicle), they are triggered at a speed of about 50 kilometers per hour.

The principle of action of this system is quite simple. The collision itself, i.e., the preparation of a sharp negative acceleration by the vehicle is recorded by the sensor. In case of exceeding the threshold impact force, the sensor closes. When receiving a signal from it, the control unit contributes to the opening of airbags.

The airbags themselves are sufficiently durable fabric bags with a special impregnation. They are revealed using gases that are allocated during the combustion of the pyropatrons, which are embedded in their base. All the procedure for fixing the strike and before the pillows are triggered.

Possible airbag errors

In some cars there is an airbag error, which may be due to the internal failure of the system. It can be detected during the diagnosis that verifies the performance of the computer and the block.

Blocked seat belts, reasons

As you know, it is necessary to fasten the safety belts to avoid injury to the triggering of pneumatic powders. Blocking seat belts most often occurs as a result of the accident when the airbags are triggered and belts are blocked at the same time, but not rarely the system can block belts due to the internal failure. To remove the lock, you need to refer to the specialists.

Diagnostics, which gives diagnostics

Safety diagnostics makes it possible to check their status, as well as the state of the block and computer, in order to detect possible faults or failures in the system for further elimination.

Accident, Airbag system worked, actions of a car owner

If, with an accident, the Airbag system worked, it is necessary to replace it with a new one, since its further operation becomes impossible. Of course, in some cases, the airbag can be restored, which is much cheaper. In addition, partial repair of the car dashboard will be required. Some car owners prefer the replacement of a faulty cushion to the uluage. But with it the lamp on the instrument panel, which indicates the absence of the SRS system, will not cease to burn. If it prevents you, put an electronic simulator.

Is it possible to do work yourself after the accident

Replace or restoring airbags, as well as the restoration of the dashboard after the accident, it is desirable to entrust the professional, as it is a painstaking and quite difficult job. In addition, if the pillows are installed incorrectly, the next time they may not work.

AIRBAG SRS indicator is on, possible causes

The Airbag SRS indicator may burn for the following reasons:

• Damage to one or more pillows.
• Lack of signal from security system components.
• Violation of door contacts.
• Contact violation or damage to the part of the wiring that combines the entire system. Circuit or overhead of wiring.
• Damage to shock sensors.
• Poor connecting connectors.
  
• The emergence of problems with fuses.
• Damage to the control module.
• The alarm system is installed incorrectly.
• Damage to the wires with incorrect replacement of the steering wheel.
• When replacing the chairs were damaged terminals or passing wires.
• When replacing airbags, which worked. The system remembers their previous position, and the module has fixed the triggering, as when an accident.
• High resistance is supplied to the driver's seat cushion.
• When replacing or disembodied, the instrument panels were damaged.
  
• The service life of pillows has been released.
• Non-professional tuning was conducted, in which the sensors were damaged or the wiring was broken.
• There was moisture on the security belt castle or his contacts.
• Insufficient battery voltage.
• The rechargeable battery is replaced in the wrong sequence.
• Cleaning was made in the cabin, terminals were affected.

Council Prof.

In mandatory, follow the condition of your car, in particular for the performance of airbags, since this will depend on this or someone else's life.

How to find and order the right sensors and fuses at a reasonable price and free shipping

1. The first step to order the desired goods on Aliexpress- registration. To register, you must fill in a special form where you need to specify the name, name and email address, which must be confirmed during the day. Otherwise, your account will be blocked by the system.
   
2. It is further desirable to go to your profile and immediately fill the shipping address so that you do not have to return to this when ordering the goods. The shipping address is filled with exclusively Latin characters.
   
3. In the search string, we drive the name of the goods that are looking for. For example, the coolant temperature sensor.
   
4. Choose goods with free shipping.
   
5. Then we sort the results by the seller rating.
   
6. When you find the desired sensor, go to the product description page and select the desired number of products.
   
7. Click on the "Buy Now" link.
8. Pay for the order.