Problems with the stove can wear different character. But we will not list and disassemble them all, as we are interested only those, the cause of which is the heater resistor on the prior. By the way, this element is not rarely called a row.

Where is the resistor (restat) of the prior stove (without air conditioning)

To successfully replace the resistor of the heater of priors, you need to know where this item is located. Experienced car owners who have already had to deal with problems in the heating system, they can smile, reading these lines.

And for inexperienced drivers, this question is relevant. If you have a car without air conditioning, you can find a resistor under the jab.

Where is the resistor stove prior with air conditioning (climate control)

In the models of priori with air conditioning, this mechanism has a different appearance and is located elsewhere.

For example, in cars with climate control Panasonic, the retaint can be found under the left janitor.

Why do you need a resistor of the stove of the prior

The operation of the resistor is to ensure the optimal functioning of the feeding speeds.

Signs of failure resistor Lada Priora

It is quite simple to understand that the breakdown lies in this mechanism. The heater begins to work only at one speed either ceases to work one of the speeds. If one of these situations originated, you can immediately conclude about the output of the referee.

Tools, fixtures, consumables

To remove the jabs you will need materials and tools:

• Marker.
• Head on "13".
• Crosshead screwdriver.
• Flat screwdriver.

Choosing a workplace

All the work on the dismantling of Jabs can be performed both in the garage and on the street.

Jabin Priora, how to remove the flashes

Jabin is a facing from the windshield. It is often necessary to dismantle when solving problems with the heater, and this process will not get around:

1. Remove the wiper brushes.
2. Using a marker, make a marking on the windshield displaying the location of the brushes.
3. Remove the decorative caps, pushing them with a screwdriver.
4. Using the head, unscrew the fastening nuts from the brush lever.
5. Using a tweezers, remove the washers.
6. Remove the brush and lever from the shaft.
7. Open the hood to remove the seal, which is on the edge of the uphols' upholstery.
8. Unscrew the fastenings on the facing and upholstery of the shield, as well as the facing of the windshield.

How to replace the resistor of Lada Priora

Order of work:

1. Disconnect the minus terminal of the battery and wire.
2. Remove the bowl.
3. From the connector on the resistor, disconnect the block with wires.
   
4. Remove attachments on the resistor using a crosst screwdriver.
5. Remove the defective root.
6. Installing a new resistor is performed in reverse order.