Scripping wipers - a phenomenon, familiar to every car owner. Perhaps the problem is in a faulty mechanism or this is the result of their natural wear. One way or another, the reason must be eliminated. However, the unpleasant sound is still Polbie, because the quality of the road review depends on the efficient work of the janitors. About this further in the article.

Skyrplay on glass, reasons for the screens of janitors on glass

There are several reasons for the screenshot of the janitors:

• Perhaps the product you bought is poor quality.
• The mechanism for fastening the part snapped up to the end. Often this happens if the installation took place in a hurry.
• Wiper can make unpleasant sounds if mounted on dirty glass. It is worth knowing that a loose fit of the element due to dust is the main cause of the screens.
  
• Pay attention to the detail mount. It is possible that the cause of the malfunction lies precisely in the wrong installation or low-quality material.
• Remember when the last time you changed the wipers. Perhaps they are already worn.
• The creaking can appear in a small angle of tilt of the wiper elastic. The angle of inclination must be at least no more than 90 degrees. Take this note.
  
• The latter is quite common - the engine cleaner mechanism itself creaks. In this case, you need to fully disassemble it and check it.

Wet glass and dry glass, is there a difference when the screen appears

Check out the presence of a screens of janitors on dry and wet glass. If unpleasant sounds are observed only in the first case, then everything is fine with janitor. The creaking is explained by the force of friction.

Castle a janitor on the glass, the reasons for the screenshot of the new janitor, how to eliminate the causes of the screap of a new janitor

If you purchased the wipers recently, and they began to creak after installation - most likely the problem is in the poor-quality goods or a loose fit of the rubber blade to the windshield. In this case, do the following:

1. Clean the glass from dust and dirt by applying different car detergents. A vinegar, soda or "Mr. Muskul" are also suitable.
2. If the unpleasant sound does not disappear, it is necessary to check the attachments and need to snap them to the end.
3. Extreme measure - replacement of brushes. For sure, buy products of another manufacturer.

Branded quality wipers, the rules for the choice of new janitors

Nowadays there are many types of automotive janitors: frame, hybrid, frameless, with a spoiler. They differ in the types of fasteners, which are about a dozen.

Framework wipers, though not expensive, but they are afraid of icing and are loosened faster. Frameless more persistent icing and better slide on glass, but they are not suitable for highly curved glasses and stand much more. Spoiler wipers are useful only at high speed. Hybrid wipers combine all the advantages of frame and frameless analogues, but have one significant drawback - the greater value.

When choosing janitors, it is advisable for your car to give preference to famous brands - Champion, Valeo, Hallo, Bosch, which have proven themselves to high quality products.

Scripping of janitors on glass, recommendations to eliminate the screenshot

• Different fluid into the glass washer. Buy only high-quality products - if the glass is very dry, the wipers will not be able to slide normally on it. Regularly check the level of fluid in the tank.
• Perhaps the brushes of wipers are broken - change them to new ones.
  
• Nowadays, there are special anti-grade fluids for sale applied by many motorists. It is they who are not rarely the cause of the screens. In addition, some car owners rub the windshield with wax, which is some extent an alternative tool. The substances that are included in the wax are capable of preventing normal sliding of the gum of wipers, thereby provoking the unpleasant sound.

Special tools to eliminate the screenshots, pros and cons

From the screen you can get rid of if you treat the gum of wipers with the help of special means that give it softness and elasticity. For this case, WD-40 is well suited, as well as alcohol solutions that are used for washing different surfaces. But remember that WD-40 is able to cause rotation of the part, so this tool must be used in reasonable doses.

Solidol to remove the screens of janitors that you can smear and what can not

Many car owners remove the creak of glass wipers on glass, lubricating them with ordinary solidol. He copes well with such a problem. In addition, other lubricants are well fit. The actual method, if the cause of the screens is hidden in the mount. Lubricating gum is strictly prohibited.

Briters with graphite spraying, creak or not, how to care for them

If you do not want to listen to the permanent creak, it is recommended to purchase wipers with a special graphite spraying, which significantly reduces the noise level, and also provides better slip. However, remember that they sooner or later require wipes with alcohol. Apply the minimum of power to avoid damage to the coating.

Council Profi: how to prevent the creak and extend the life of janitors

• To extend the service life of the janitors, periodically rub the rubber bands with an alcohol napkin. Look at how much the dirt will remain on it after this event. The particles of dust and garbage do not give an element to function normally, which is why there is an unpleasant sound.
• Do not buy universal wipers, because a certain model is suitable for a certain car model. Sometimes it is possible to break down, loosely fastening and fitting. In mandatory, write down the name of suitable wipers so as not to spend your time next time.
  
• It is not recommended to use wax or special oils for the front glass. Such substances make the surface too slippery. In addition, they are the main reason for the damage of the wipers.
• You should not use janitor if the glass has frozen. This may entail the separation of cleaning gum from brushes.
  
• It is strictly forbidden to fill the dishwasher, which makes the glass clean already up to the screens. Such an effect can be seen on plates.
• Watch that the liquid that you pour into the tank is clean, as the garbage and dirt can damage the wipers.