Interestingly, the replacement of the sailion of the scenes on the "top ten" should be performed if oil leakage is leaked from the checkpoint. You can perform this procedure in two ways, the first of which involves disassembling the gearbox. The second is performed directly by car, without removing the checkpoint. About this further in the article.

Kulis KPP VAZ 2110 Device and principle

Kole KBP is a multi-storey device that is intended for binding a selector (gearbox lever) and rod. The design of this node includes the following components:

• Plug Kulisi.
• Forklifts.
• Finger fixture device.
• Figure fork device selection device.
• Traction selection gear.
• Gear shift lever.

All data elements are interconnected.

Scheme of the KPP VAZ 2110

Salt Kitis KPP VAZ 2110, what is it and where it is located

The gland is a device used in the car for sealing rotating shafts and parts. The main function that the seals perform is the absolute sealing of the junction of mobile or fixed surfaces. Simple words, the gland does not allow a lubricant to outward. On the "top ten" sores of the scenes are located under the boot.

Signs of malfunction of the salinity slices KPP VAZ 2110, malfunction diagnostics

The first indicators pointing to the need to replace the gearbox seal are oil trails and leaks on asphalt after a long downtime of the vehicle. However, it is necessary to understand that the reasons for this defect may be several, in particular, not a fully twisted oil filter.

However, if the matter is still in the gland, it is important to detect the problem in a timely manner and eliminate it, since the oil outside the checkpoint can lead to the need to replace the box. In order not to bring before that, systematically check the oil and follow its level in the box and engine. In addition, a fracture of the gland can also be shown when switching gear.

Tools, fixtures, consumables

In the course of work, you will need such tools:

1. Plastic cork.
2. Awl.
3. Keys on "13" and "10".
4. Hook.
5. Screwdriver.

Choosing a workplace

All stakeholders are performed on the lift or observation pit.

Safety technique

Do not forget to put the vehicle to the handbrake and fix it with anti-digit wedges.

Replacing the seal slices KPP VAZ 2110 (in detail)

Order of work:

1. The Kulis on the VAZ is actually always covered with a special rubber boot. If the cuff is faulty, this boot will be all in oil, which will once again indicate the need for replacement.
2. Begun a wide part of the anther. Below is the Cardan.
   
3. Disconnect this cardan from the lever and rod, thus getting access to the cuff.
4. Unscrew the nut completely, which will reduce the connection of the lever and the cardan.
5. Remove the lever from the cardan.
   
6. Turn on the first or third gear.
7. Fully disconnect the cardan from the scenes.
8. Remove the cardan.
9. Remove the rubber boot.
10. Now you will be a cuff, located in the recess. It is here that the gland is included in the checkpoint. It must be removed from this deepening.
    
11. It is worth noting that in fact it is impossible to remove the cuff from the rod without the use of a special tool.
12. So, enter the awl and hook inside and thus remove the cuff. Also in the paper you can use the self-tapping screw to be screwed into as a corkscrew and sculpt the gland.
    
13. After extracting, clean the seat and press the new cuff inside the stock.
14. Assembly perform in reverse sequence.

Tips Prof.

It is much easier to replace the gland with a plug from a plastic bottle. Insert a new gland into the inner part of this cork, which you want to cut in advance. Then you enter the gland.