The appearance of cotton in the exhaust system indicates violation of the engine activity. Basically, such malfunctions are characteristic of carburetor devices. As a result, it is possible to establish that the gas distributor is broken or one of the elements of the ignition system came into disrepair.

Why shoots silencer

Of course, not possessing rich experience, establish the cause of the occurrence is hard.

The reasons for which the engine behaves is enough, one of them is associated with gas distribution, or rather with a phase disorder.

But before starting the events to eliminate cotton, it is necessary to understand why they arise.

If the exhaust system issues sharp and loud sounds, like shots, then, most likely this is the result of flammable flammable in the exhaust system of exhaust gases.

Primarily inspect the air filter and carburetor.

You should also check the settings.

Fuel, in which not enough air is oversaturated.

As a result of this, after passing the combustion chamber, the part remains not touched and passes in the direction of the exhaust manifold.

Further goes to the muffler. Here, under the influence of a temperature that is high enough, the fuel lights up.

The problem is solved quite simple.

The first thing is checked, fuel supply.

If it does not comply with the standards, adjustment is carried out.

Here is involved carburetor.

Next What can be done is to disassemble the air filter, if necessary, replace the filtering elements.

Cotton in the silencer, o What they say

In the event of instability in the operation of the engine, most car owners, to establish the cause, try various modes of operation.

The heat gap of the head of the cylinder block is not regulated enough, if the cotton arise at various revs.

Warming up the engine, the car's work accompany cotton, here you may need to adjust the valves.

There is a thermal gap formed by the camshaft elements and the valve terminal.

Details made of metal during engine warming are slightly increased in size, which helps to reduce the above mentioned gap.

Proper adjustment provides a tight connection of the plate and the nest of the valve.

The valve does not cope with its function, if this gap is missing. Fuel particles passing through the exhaust manifold, light up.

This arises due to the presence of a small gap, through which fuel under pressure, as a result of cylinders.

Cotton in this case is eliminated by adjusting the cylinder head block valves.

Later ignition, Cause Cotton

Flare fluid can occur with delay.

Why does it occur?

Here it is necessary to deal with the settings of the ignition system.

At the time of compression, the spark is formed, the piston is at the top point.

This spark is the cause of fuel ignition.

When the ignition does not fall into the last time frame, the fuel is flammable on the time cut of the movement of the piston at the bottom point. In parallel, the exhaust valve is revealed.

Therefore, the mixture, slugging, fits into the exhaust manifold.

As a result, cotton arises.

In order to avoid such situations, constant control of the owner of the car is necessary.

The appearance of cotton is a violation of the engine activity.

Cotton arise along the above reasons, and not worth tightening with repair.

These symptoms are a direct signal to the technical inspection.

With a negligence, damage to systems and mechanisms is possible, until the vehicle is ignition.

But the cotton has a positive side, so the driver is informed about the problems arising.