Xenon call light with high intensity. It is installed on a car, as a replacement of standard Famos. If you wanted to establish such headlights, you should familiarize yourself with some nuances in advance, as well as the sequence of the installation procedure. This information will be presented slightly below.

What you need to know before installing xenon

I would like to immediately make a warning that if you do not have certain skills in the field of installation work, even the most minor, find a good specialist for this.

Especially in the event that the car is new and has a warranty period.

Then the official car dealer will not be able to refuse to fulfill warranty service.

And if you risked on your own installation, then count on the hour of work, no more. The main thing is that the instruction is clearly followed.

One xenon set includes two lamps, wiring for connecting, two blocks for ignition, two brackets in order to bind blocks, two fuses, installation instructions xenon.

It must be accurate and clearly placed inside the car headlight. And also, I want to warn that such a replacement is trouble with DPS.

The procedure for installing xenon

replacing xenon

It is necessary to first remove the old headlights, as well as the cover of the near or far light.

If you wish, install Bixenon, you need to remove both covers.

Then, in the central part of the lid, it should be done using a drill a hole having a diameter of approximately 23 mm.

Next, you need to skip the wiring of the xenon lamp through it and fix the rubber waterproof ring in the metal-made hole located on the wiring.

After that, establish xenon lamps to the place where the old and fixation were made.

installation and installation of the ignition unit

The next step is to connect the wires of the lamp and the ignition unit. They are connected to the power supplies, the place of the old lamp, to the overall wire.

Then you should install the protective lid and return the headlight to the previous place.

Focusing on the location of the headlight, the ballast should be installed, in other words, the ignition unit. The place of establishment is obliged to be at the highest distance from the engine and should not be heated strongly. The ballast should not be located near the moving items or in areas where water can penetrate.

Xenon headlights can be easily removed and again replaced with old headlights. This is the case if the car is sold. And these headlights can again be applied with respect to a new car.