During the operation of the vehicle, its thresholds are regularly subjected to all sorts of negative impacts. Starting from sharp heels, ending with a variety of chemical reagents that fall on them again with shoes. As a result, paints and varnish thresholds comes to an unsightly state, scratches appear chippers and significantly increases the risk of rust. To prevent this, a special protective film was created to protect the vehicles of the car.

Protective film, what tasks it must perform

The thresholds of the car are constantly exposed to a variety of negative impact. Moreover, we are talking about both internal and outdoor thresholds. Damage to the paintwork leads to the appearance of rust, which is fraught with costs for expensive repair and painting. The protective film allows them to protect them from all kinds of negative consequences, keep the appearance of the car, avoid the cost of repair and painting thresholds.

Interesting! The procedure for sticker protective film on the thresholds is also called the booking thresholds of the car.

Advantages of a protective film for booking thresholds:

• Protects the surface of the thresholds of the car from a variety of scratches, chips and corrosion;
• Average service life from 4 to 7 years;
• Leaves no trace after removal;
• Does not affect and does not enter into a chemical reaction with paint and varnish coating;
• It is usually 100% transparency and absolutely not noticeable by car;
• Does not require absolutely no care (paste and forgot);
• Gives a glossy effect.

Protective film on the thresholds how to choose which better

When choosing a protective film for booking a car thresholds: to stop your attention to the well-proven manufacturer and adhere to the concept than it is thicker, the better.

Important! To protect the inner and external thresholds, as well as all other elements of the body, it is better to acquire a film with a thickness of 250 microns and more. This film thickness for booking is most effectively protecting the elements of the car.

high-quality protective film manufacturers

Well-proven protective films manufacturers for booking car thresholds:

• 3m Venture Shield. Manufacturer of protective films from the USA. It is one of the leading players in the market for booking films. Releases films with different thicknesses from 150 to 300 microns. Protective films from 3m are characterized by tremendous strength and absolute transparency.
• Hexis. Manufacturer of protective films for cars from France. It is also considered one of the colossus in the production of protective films for booking. Produces protective films of two species, 150 and 300 microns. It is highlighted in excellent price / quality and has better transparency among its competitors. HEXIS film service life, 6-8 years.
• Suntek protective film from the American company Laminating & Coating, Inc. Also included in the top three leading manufacturers in the production of protective films for booking a car. Differs high density, durability and reliability. The term of the film from Laminating & Coating, Inc. reaches 10 years.
• CARLUXE +. Manufacturer of protective films from Taiwan. A good manufacturer of protective films for booking thresholds and all other elements of the car. It produces two types, 200 and 250 microns.

Tools assistants in work

To book the verge of car, protective film, we will need:

• Protective film for booking (thickness of at least 200 microns);
• Soap solution (best use fairy or children's shampoo, without alkali);
• Bottle with a pulverizer;
• White spirit (for degreasing the surface);
• Powerful hair dryer (desirable construction);
• Acute knife;
• Scissors;
• Soft rocket.

How to glue the film with your own hands, step by step instructions

Prepare everything you need to book the thresholds of the machine can be directly proceeding to the pasting process.

The principle of applying a protective film for booking thresholds, practically nothing different from the stickers of all other films per cars.

And so, we will proceed to booking the thresholds of the car using a special protective film:

1. First of all, it is necessary to dismantle plastic linings on the thresholds (if present);
2. After dismantling overlays, carefully clean the thresholds from all kinds of dirt and dust;
3. We try the film on the stuck threshold;
4. With the help of a knife and scissors, cut out the film (cut is needed with the allen);
5. We produce the final fitting of the film before the sticker (cut it, if something is wrong);
6. Degrease the surface of the attached threshold using White Spirit;
7. Spray the surface of the threshold with a soap solution with a sprayer;
8. Glue a protective film on the car threshold;
9. In places of complex bends, you can heat the film using the hairdryer (when heated, the film becomes more elastic);
10. Runify the film with a mild rocket, while removing air and soap solution from under the film. In the process of reclamation, heating the protective film with a hairdryer;
11. Cut the extra edges of the protective film;
12. Cut holes in the protective film, for fastening plastic linings on car thresholds;
13. We establish and secure plastic lining in your place.

Important! In a similar way, the rest of the car, such as headlights, bumper, wings, door handles, mirrors, and so on.

Tips of professionals

• Booking thresholds with a protective film is better to perform together, an additional pair of hands will never hurt.
• When the protective film is heated with a hairdryer, you should be careful not to bore it.
• When buying a protective film for car thresholds, it is better to stop your attention on well-known manufacturers. Which make high-quality and reliable protective film.
• To book the thresholds of the car, it is necessary to purchase a protective film with a thickness of at least 250 microns.
• We also recommend reading articles on our website "Carbon film for a car" and "glass toning with your own hands." The carbon film is also capable of protecting the car from a variety of damage.