The windshield is one of the most important elements of any modern car that can perform both decorative and protective functions. Windshield is a durable transparent screen, installed in front of a cabin of any passenger or truck. The installed protective glass prevents the driver of the car and all passengers from obtaining possible injuries, as a result of entering small stones, garbage, midges from the road and other items. In addition, the windshield protects against a strong wind stream with a significant increase in speed and creates high-quality aerodynamics. High-quality windshield easily cope with all this. But do not forget that raw weather can negatively affect the review of the situation on the road, since condensate from the car's cabin is formed on the surface of the car.

Condensate on glasses why condensate appears in the car

Each motorist annually faces the situation when the glass in the car is covered by condensate, thereby worsening the visibility of the situation on the road for the driver. This occurs when the air temperature on the street begins to gradually fall to the minus mark, and inside the car's cabin, the air temperature is significantly higher. The temperature difference has a significant effect on the rate of condensate formation on the windows of the car.

Condensate on the windshield can appear due to the lack of good air exchange, as a result of a significant temperature difference inside the cabin and beyond. Also, the increased humidity inside the cabin has a significant effect on the fogging of the glasses, when the heated oven air in the cabin comes into contact with the cooled glass. First of all, it is necessary to deal with this problem, because strongly dove glasses in the cabin car have a negative impact on the safety of motion. Condensate on the glasses brings not only inconvenience to the driver and passengers, but also significantly worsens the review in all directions.

Possible causes of fogging glass

The safety of the vehicle is the basis for each car owner. Especially relevant This question becomes during the off-season, when the air temperature on the street is gradually decreasing, and the amount of precipitation and humidity increases significantly. This is exactly the most affects the problem of fogging glass in the cabin of any car, as well as a large number of people who for a long time are located in the car.

violated sealed windshield seals, how to eliminate

Violation of the tightness of the cessation of windshield is one of the most common causes of fogging glass. The biggest problem in this case is that how many windshield do not wipe the condensate from the condensed on it, it will appear again and again.

The most effective way to cope with this ailment in the car's cabin, it is to quickly check the salon on the tightness and replace the dry or damaged glass and doors seals. This will allow you to quickly optimize the internal climate in the cabin and reduce the level of condensate formation on the inside of the windshield and other glasses.

the influence of climatic conditions, how to eliminate

Riding in a dry climate will not cause condensate deposition on the inside of the windshield, since in this case there is no actual difference between the temperature in the car's cabin and beyond. While wet climatic conditions are the main problem for all car owners. The wet environment is the most common cause of condensate formation among car owners and cope with it most problematic. It happens because warmer air inside the car, getting into a cold windshield to turn into a drop, forming a muddy film.

First of all, it is worth checking the car's interior for tightness, because it is the damaged salon seals that allow you to fall into a large amount of moisture in the car's salon, both when driving and stopping. After entering moisture to the cabin car, it gradually settles on the glasses, worsening visibility. Secondly, you should walk with a dry cloth on the surface of the glass, eliminating it from excess moisture. In the event that the tightness of the seals is not broken, the condensate will appear much slower.

A more correct method of getting rid of windshield from condensate will be drying the air inside the cabin. To do this, you should warm the car's interior and send the stream of hot air from the stove on the windshield. The maximum effect can be achieved with the help of an air conditioner if it is available in the car. Thanks to him, the air inside the car is very quickly dried and the condensate will not appear.

Do not neglect the fact that the moisture can fall into the car's salon along with raw shoes and clothing, which leaves wet traces on the surface of rugs and seats. To avoid this, it should be regularly airing the car's salon, and if the air conditioner is available, it is possible to periodically turn it on. Thus, the air inside the car will be significantly land.

cabin air filter is scored, how to eliminate

Very often, car owners happen so that the cabin air filter is clogged. With the air intake included outside, the air flowing into the interior passes through a special filter, cleaning the air. In the event that a strong clogging of the cabin filter occurred, the fogging of the windshield and other glasses will occur much faster. If the filter will be clean, the glass fishes will also be, but after a much larger period of time.

The appearance of condensate on the inside of the windshield of the car is directly related to the increase in air humidity inside the cabin. The scored filter increases the formation of condensation due to the fact that the air into the cabin will have a smaller air exchange.

In order to cope with this reason for fading windshield, it is necessary every 15,000-20,000 km to replace the cabin filter of the car. This will allow not only to reduce the formation of condensate on the surface of the glasses, but also reduce the amount of dust, pollen into the salon, pollen and various harmful chemical compounds.

In order to independently change the clogged cabin air filter to the new, it is necessary to know its location. Each car brand has its own design features, therefore, before replacing the filter, you should read the characteristics of the required auto model.

ventilation and salon heating are incorrectly configured how to eliminate

The clogged ventilation of the car's interior is incorrect, as well as a faulty heating system have a positive effect for the formation of condensate on the surface of the windshield. In addition, in a wet environment, during the opening of the door, the amount of moisture in the air increases, which is subsequently condensed and turns into small drops on various surfaces.

In order to properly adjust the ventilation of the car, it is necessary to turn on blowing the windshield to the maximum speed. At the same time, in order to get rid of moisture in the car in the cabin as quickly as possible, the central air holes should be overlap, sending the entire air flow to the windshield.

Correctly configured the air conditioning system will be the best helper in the fight against moisture in the car. Automotive air conditioner dries air to extremely short time and allows you to save the windshield from the appearance of condensate droplets on it.

the drainage system under the hood of the car is clogged, how to eliminate

Almost all car owners face the problem of fading the windshield in the autumn-winter period, when the level of humidity of the air increases significantly and a large amount of precipitation appears in the form of snow and rain. The cause of moisture penetration can be not only a disturbance of the tightness of the car salon seals, opening doors, side windows. A large amount of air enters the interior through the air conditioning system.

The device of each car provides for the presence of special drainage holes under the hood used to derive water and moisture. Water falls there through special holes located under the windshield on the side of the hood.

Very often, the holes for the withdrawal of water and moisture are clogged with various trash, including fallen leaves from trees, accumulated mud, and leads to stagnation of water. After that, the moisture enters the air conditioning system through nearby holes and penetrates the cabin, thereby increasing the humidity inside. Such a reason is relevant in any modern car.

Periodic cleaning of the drainage system from the garbage that has fallen there, will significantly reduce the rate of formation of condensate on the windshield of the car.

Tools, accessories, household chemicals and consumables to help the driver

The problem of condensate formation on the surface of the glass, especially in crude and cool weather is the current absolute for all modern cars. The fact is that the level of environmental humidity is very difficult to control, and when the temperature drops appear outside and inside the car, this problem becomes even more apparent.

In order to minimize condensate formation on the surface of the car's glass, you can use some infrident materials, special automotive chemistry or other additional tools. Since the easiest way that can come into mind with any car owner is to wipe the glass with a cloth, it may not be so effective. It is also not always convenient during the movement of the car and significantly affects the safety of motion.

However, there are a number of other ways that allow you to quickly and for a long period to get rid of the stuffing glass.

how condition helps or climate control

Car conditioning system or climate control are the most effective tools to get rid of windshield from condensate. This way to save for a long time to take a rag in the hands and wipe the glass from the droplets that appeared, making the windshield transparent.

The reason for the formation of condensate is the difference in temperatures outside the cabin and inside it. Therefore, one of the way to reduce the possibility of its education in the future is to minimize the difference in air temperature. The special mode of blowing windshield with cold air will significantly reduce the glass temperature and reduce its fogging.

If climate control is installed in the car, then its work will reduce the availability of moisture air, by draining it. It is the use of a control climate that is the most efficient and long-term way to reduce the formation of condensate on the surface of the cooled glass.

In the event that the auto air conditioner is not installed, then reduce the temperature difference inside the cabin and on the street you can at the expense of the side glasses. The temperature in the car will significantly decrease and condensate will be formed significantly less.

how helps blowing windshield

One of the ways to reduce the degree of fading of the windshield for a while is by blowing it with strong air pressure. By blowing allows you to increase the air exchange in the car's cabin and actually warns the windshield from the emergence of new drops of moisture.

The only drawback is the same temperature difference. To warn the windshield from the appearance of condensate on it, blowing only in cold mode, which will minimize the temperature difference inside the cabin and beyond.

anti-recorder, how to use it, detailed instructions

Another way that will save the windshield of the car from the appearance of moisture on it and improve the visibility for the driver, is the use of special auto chemicals, such as an anti-recorder. This is one of the most efficient ways that does not allow to gather moisture on the windows of the car.

The application of special chemistry is one of the easiest ways and at the same time is very effective, which allows you to save a lot of time for the driver to periodic glass wipes. With the help of a special fluid, it is necessary to process all the glass in the car's cabin, which is called the "Antisputor". Such a liquid from the appearance of condensate can be purchased at any automotive store, in a variety of hypermarkets and gas stations.

All modern "antisoles" are made from special qualitative materials that impede the formation of condensate on the glasses, while there are no divorces. Such chemistry does not eliminate the salon of the car from moisture, but with the moisture will not be collected in drops.

It is worth remembering that the "anti-recorder" is applied only on the clean and dry surface of the glass, after which a thin transparent film is formed on it. It is the protective film that will not allow to settle moisture on the glasses, obstructing the formation of condensate. Many modern means are held on the surface for quite a long time, but periodically glass will need to be processed.

Thus, such a type of combating condensate on the windshield is one of the most efficient.

rags, napkins from microfiber, tips on use

Faced with the problem of fogging glass in a cold period of time, every car enthusiast to find for itself the fastest cleaning method is to use a conventional rag. At first glance, this method will become really the fastest and must be no less effective, but it is not always the case. Glass watched by a regular cloth only for a short time eliminates the problem that has arisen, after which it will have to wipe all the glass. In addition, unpleasant divorces remain from the rag on the glass, and it is also not always convenient to remove the condensate from the surface of the entire glass.

The best option will be the use of microfiber napkins, moreover, it will be more effectively done in the complex with other ways. Microfiber wipes leave a minimum of a pile and divorce after their use. Also, they effectively absorb moisture from any surfaces.

Council Profi: Why wipe the glass is needed diagonally in one direction

The experienced motorists and vendors of automotive chemistry recommend all owners of the car to use to remove condensate from the surface of the glass only rags and napkins made of microfiber, as well as paper towels. It is these materials that will remove the moisture accumulated on the surface of the windshield.

In addition to this recommendation, it should also be paid to the fact that it is necessary to wipe the glass in one direction and is preferably diagonally. This will significantly reduce the amount of divorce on the glass.

How to find an aliexpress to find and order car care accessories at a reasonable price and free shipping

Aliexpressit is one of the most popular and visited shopping sites around the world. Due to its popularity, a huge amount of the store provides the opportunity to purchase the most suitable product for them and at an affordable price.

Car care accessories are one of the most common types of goods. To get into the accessory directory from the main page Aliexpress Go to the full list of all sections by clicking the " See all"In the upper left part of the page.

After that, in the section " Cars and motorcycles»Go to category" Tools, maintenance and care". It is in this category that you can purchase a large number of all kinds of goods that can be used to combat condensate.

Each buyer chooses goods with the most reasonable price, while paying attention and delivery costs. Despite the company's innovation Aliexpressthe rules about the ban on free shipping to the countries of the former CIS, in the section of accessories for car care, you can find both inverse.