Automotive tuning today is popular than ever. Quiet to pass by the tunned car without turning him attention, can not be divers, and simple passersby. They just attract a look, and make them admire them. Large popularity in tuning lovers uses carboxylic film. Outwardly, it is nothing different from the insanely expensive carbon carhorn fiber, and its price is somewhat less.

Carbon film - car protection and tuning

Carbon deprived a huge number of auto tuning lovers. He conquers his truly unique texture and sports-aggressive View, but his price is incredibly high.

Carbon film Unlike him, make your car exclusive and unique, at a reasonable price. It can be combined with each other, creating its unique appearance of the car. Motherland carbon film, is Japan.

Consider a closer look at the carbon film. This is a special film that mimics the texture of carbon carbon fiber on one side, and with another adhesive basis.
In addition to the magnificent appearance, the carbon film performs a protective function. It can protect the car body from chips, scratches, chemical reagents and paint and varnish damage.

Advantages and disadvantages of pasting carbon film car

As mentioned earlier, the carbon film perfectly protects the body of the car from a different kind of damage, but on this its advantages do not end:

• Durability (its service life can reach 9 years);
• It is moisture resistant and does not miss harmful ultraviolet radiation;
• Has high wear resistance;
• Very elastic and well stretches, which allows you to stick it on any part of the car.

For minuses, except that it can be attributed to her high cost, while it is still more considerable cheaper carbon carhorn fiber.

Methods for applying carbon film

There are two different methods of the carbon film of the car is dry and wet. We analyze these methods in more detail.

dry apparent carbon film, advantages and disadvantages of this method

The dry method of pasting carbolic film is used in specialized car dealers.

When applying this method, humidifiers do not apply, and it is glued at once. For this reason, the film must be pasted the first time, since any of the flaws that appeared when gluing will be eliminated. This method is much more efficient than wet, film passed by this method serves longer.

carbon film, is it possible to dry the car with your own hands

Performing this way better entrust professionals. You can take a risks of course and try it yourself, but in the event of an unsuccessful attempt, the second chance paste this film will no longer be, with this you lose the film itself, and the money that paid for it.

In the showroom for this work will have to pay a considerable amount. The approximate cost of complete pasting in the car dealership, for the car class C begins from 60 thousand rubles and can reach 180 thousand rubles, depending on the film selected.

For this money, the work will be done professionally, and will give a guarantee.

carbon film of wet application, dignity and disadvantages, can it be done with your own hands

The wet method of applying carbon film on cars is much easier dry. When gluing this method, a soap solution is used as a humidifier.

The main advantage over the dry method is simplicity, which allows you to stick the carbon film with your own hands without any particular difficulties. The service life of the film by the accrued such method will be less.

Carbon film flow rates on different car models

Consider the approximate consumption of carbon film to different models of cars in the route meters:

• VAZ 2109 - 15 P.M.
• Lada Priora (Hatchback) -17 P.M.
• Peugeot 206 - 15 P.M.
• Kio Rio (Hatchback) 2 - 18 P.M.
• Chevrolet Aveo - 18 P.M.
• Audi A6 - 22 P.M.
• Volkswagen. Passat. 65 - 21 P.M.
• Nissan Cascai - 26 P.M.
• Mazda 3 - 21 P.M.
• Honda Civic (Sedan) - 20 P.M.
• BMW X5 - 30 P.M.
• Opel corsa. - 16 P.M.
• Renault Megan - 19 P.M.
• Toyota Corolla - 21 P.M.

Middle Consumption:

• Sedan: from 15 to 20 pm
• Hatchback: from 17 to 25 pm
• SUV: from 20 to 30 pm

For pasting individual details:

• Hood: from 1 to 2 p.m.
• Roof: from 1.5 to 3 pm
• Trunk from 1 to 1.5 pm
• Mirrors: from 0.5 to 1 p.m.
• Racks: from 0.5 to 2 pm

The film consumption may vary as the width of the routine meter may vary from 1.2 m. Up to 1.5 m.

Carbon film - with their own hands

Consider how to apply a carbon film "wet" by your own hands:

selection of work space

Application of carbon film must be produced in a dry place (garage, boxing, etc.). In the absence of precipitation and wind in sunny weather, it can be glued on the street. To the selection of space for the production of work, it is necessary to take very seriously. The air temperature should not be 26 degrees. With a violation of the temperature regime, the carbon film will not be launched and pairs of months.

preparation of instruments and material

In the manufacture of works on the carbon film pasting, we need to have at hand:

• Stationery knife and scissors;
• Sprayer (for soap mortar);
• Alcohol;
• Glue-sealant or Primemer 3M;
• Soap solution;
• Molar tape;
• Pure rag;
• Plastic and felt rocket.

• Industrial hair dryer (you can also try Use an ordinary female hairdryer, but it has too low power, it will take more time).

preparation Machines to pasting

Before the sticker of carbon film, the car needs to be perfectly wash.

The elements of the car to which the film will be glued must be deguted with alcohol. Carefully view again the car for dirt and dust.

advice professionals

• It is necessary to watch it very carefully to not overheat carbon film with a hairdryer. May have problems with her Application, or she can melt.
• Instead of a soap for making a solution, you can use Fari., AOS Or another detergent.
• When the film is heated with a hairdryer, it is necessary to withstand the distance of about 20 centimeters. Protect the film, you need evenly uniformly delaying the hot jet of air in one place.
• Dismantle before sticking the carbon film all plastic linings, moldings. Do not trim the film into the joint with them.
• Do not allow wetting the adhesive side of the film. May have problems with her Removal.
• One is problematic to produce, therefore it is desirable to produce this process for at least two.

Progress of work on pasting carbon film gradually

1. Initially, it is necessary to fit the carbon film. We apply it to the element that are going to be saved (no removal substrate). We find the optimal position and with the help of molar tape are placing the film. Orthodox complicate fitting, type patience and do not rush. As the Russian proverb says "Some seven times, a rejection once." It is necessary to approach the fitting very carefully.

2. Highly cut the film for the element, leaving a small reserve from all sides.
3. Filter film on the table or friend is a smooth surface and gently sprinkle the substrate from the adhesive layer. Carefully watch it so that she does not bond the film with itself.
4. Communicately sprayed with a sprayer glued elements with soap solution, it allows you to adjust the location of the film when it is already pasted on the body.
5. Schedule stretching the carbon film we apply to the attached element. Uniform movements, plastic rockers drive out air and water, first the middle, then the edges. If a fold formed somewhere, then we separate this part of the film and glue. We stretch the film on the surface, while heating it with a hairdryer.
6. By the entire surface, we produce heating of the carbon film and with the help of a soft felt of the rochel with smooth movements from under the film we remove the remnants of water and air.
7. Supply it for 15 minutes.
8. Cutting an extra film, from the edges, we leave a stock of at least 5 mm, and carefully sample them with pramera or sealant. The sprinkling of the film begins with the edges, so their cloaks pay special attention.
9. I wake the entire surface with a clean rag. We leave the car at least 24 hours at the temperature of the past.

The difference between the dry and wet method consists only in the use of a soap solution. At your own risk, you can also try to stick the carbon film with a dry method.

How to make a disassembly of carbon film

Dismantling of the carbon film does not deliver much difficulty. For her dismantling, you need warm weather or room with a temperature of not lower than 20 degrees, warming in it a car. After that, it is necessary to heat the captivity itself to 60-80 degrees. When the film is sufficiently heated, it remains gently to remove it, and remove the remnants of the car's surface glue.

So we see that stowing And the dismantling of the carbon film will not be labor to a person who has the necessary knowledge and skills.

On the market today there is a huge selection of carbon films, different colors and textures. To the choice of film must be taken very carefully because exists A huge number of unfair manufacturers manufacturing it that violate the production standard. Many as international and domestic drivers produce carbon film for all standards. Choosing the film follows attention on it Flexibility and strength.